What is the potential difference across the capacitor?

AI Thread Summary
The discussion focuses on calculating the potential difference across a parallel-plate capacitor with specified dimensions and charge. The relevant equations include capacitance (C = Q/V) and the formula for capacitance in terms of physical parameters (C = epsilon * A/d). The user has calculated the area of the plates and the separation distance but is struggling with the final calculation, having tried several incorrect values. Another participant mentions having similar issues but eventually resolves their calculation errors. The thread emphasizes the importance of showing detailed calculations for clarity and accuracy.
Netsurfer733
Messages
17
Reaction score
0

Homework Statement



"Two 2.1cm x 2.1cm plates that form a parallel-plate capacitor are charged to +- 0.705 nC. What is the potential difference across the capacitor if the spacing between the plates is 1.20mm? "

Homework Equations



C = Q/V

C = epsilon * A/d

The Attempt at a Solution



I figure epsilon = 8.85 x 10^-12 F/m
A = area of plates = 0.021 * 0.021 m^2
d = separation of plates = 1.2 x 10^-3 m

And so I've tried plugging it all in and I still didn't get it right. In my attempts, I've tried answering with 2.17, 3.25*10^-12 , and 2.16*10^11 with no luck. Can anyone point out where I've gone wrong?
 
Physics news on Phys.org
Have you calculated the potential difference or just tried numbers in random? Show your calculations in detail.

ehild
 
I did - but I apparently suffered a flurry of math errors. I got it anyway :)
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top