Uniformly accelerated motion- a weird kangaroo prob

AI Thread Summary
To determine the takeoff speed of a kangaroo that jumps 2.5 m, the initial velocity (Vi) is zero, and the acceleration due to gravity (g) is -9.8 m/s². The relevant formula to use is Vf² = Vi² + 2as, where Vf is the final velocity at the peak of the jump. For the car skid mark problem, with a distance of 290 m and an average acceleration of -3.9 m/s², the same formula applies, with Vf set to 0 m/s at the end of the skid. Understanding these concepts allows for solving both problems effectively.
bjr_jyd15
Messages
73
Reaction score
0
Uniformly accelerated motion-- a weird kangaroo prob

Ok, I have this simple Question:

A kangaroo can jump straight up 2.5 m -- what is its takeoff speed?
How can I solve that given just one variable. Well, I know that Vi=0, right?

Also, if you anyone can help me try to solve this one?:

A car in an auto accident left skid marks 290 m long. Assuming an average acceleration of -3.9 m/s/s (that is, -0.4 g), calculate the Jag's speed when the brakes locked.

I know acceleration and scalar distance, but I don't know anything about the initial speed and such. So how can I choose a formula?

Please Help.

Thanks
 
Physics news on Phys.org
For first problem, review Free Fall.

For the second problem, what happens when you apply the brakes?
 
When the brakes applied, the car slows, right? And skids 290 m. I'm not sure where to go from there :confused:
 
This is how i believe the question is solved:
Vi=?
Vf=0m/s
a=-3.9m/s^2
t=X
d=290 m

use thsi formula
Vf^2 = Vi^2 + 2ad
 
I'm an Aussie, so I should be able to help with the Kangaroo question! :biggrin:

First off, you have more than one variable.

(Assuming that the kangaroo is on the Earth) The acceleration can be given by g. (ie use -9.8 m/s/s)

The displacement is 2.5m, and Vf = 0 (at the top of the jump, the kangaroo's velocity is zero).

Vi is the unknown, that you want to calculate.

I believe the constant acceleration formula you might need is:

v_f^2 = v_i^2 + 2as

where Vf and Vi are the final and initial velocities respectively.
a is the acceleration
s is the displacement


also don't forget the direction of things. (if you use +2.5 for the displacement, you MUST use -9.8 for the acceleration)
 
thanks

Great, thanks Tyco and punjabi. I got the problems, and I actually understand them. :biggrin:
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top