Discover How to Measure Laser Wavelength with Modern Physics - HELP 911

  • Thread starter Thread starter kizersi5
  • Start date Start date
AI Thread Summary
The discussion focuses on deriving formulas for measuring laser wavelength using interference patterns created by a monochromatic beam. The key equations presented are 1/λ = 2 * dm/m and m = (n-1)(2*d/1)*(Dp/Patm), where dm represents the distance moved by a mirror, m is the number of fringes crossing a reference point, and Dp is the pressure difference. The setup involves a half-silvered mirror that splits the beam, with interference occurring at point O when the beams are combined. The movement of the mirror alters the interference condition, leading to observable fringe changes that correlate with the wavelength. Assistance is requested for a step-by-step derivation of these formulas.
kizersi5
Messages
6
Reaction score
0
:!) :confused: My problem is that I am required to derive such formulae, which are:


MEASUREMENT of the LASER wavelength.


(1) 1 or lamda = 2* dm/m & (2) m=(n-1) ( 2*d/1)*(Dp/ Patm)

dm= distance of the movable mirror moved toward a beam splitter.

m= no. of fringes that cross a given reference point.

Dp = Pressure(final)- Pressure(initial)

d= distance of the vacuum air cell that was used upon experiment to generate fringes

Patm= atmospheric pressure=760atm.

I would appreciate any help deriving these formulae in step by step way.
 
Physics news on Phys.org
A monochromatic beam (1) entering from the left splits up at B, a half silvered mirror, into two beams (2) and (3) and is reflected back by two mirrors. Beam (2) continues onwards to O and on its return (3) is reflected downward also to O (part of both beams actually since the mirror is half silvered). At O the beams are combined optically resulting interference of the two beams. If the paths of the two beams , (2) and (3), are the same length constructive interference will result at and a bright fringe will be observed at O. If the movable mirror is moved \frac{\lambda}{4} closer to the beam splitter this condition will change to destructive interference. If the mirror is moved by \frac{\lambda}{2} one fringe change will be observed at O. This gives you your first equation.
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top