How to Choose the Right Inverter: 24v DC to 220v AC Conversion Guide

  • Thread starter Thread starter moh_89
  • Start date Start date
  • Tags Tags
    Inverter
AI Thread Summary
To convert a 24V DC current of 40 amps to 220V AC at 4 amps, a specific inverter model is needed. The original poster faced confusion at a store regarding the inverter number required for purchase. Recommendations were made to check with a specific retailer, Inverters R Us, known for quick shipping options. The conversation highlighted the importance of knowing the correct inverter specifications when seeking assistance. Clear communication about technical requirements is essential for successful purchases.
moh_89
Messages
1
Reaction score
0
Hi there
I need an inverter to convert a dc current of 24v and 40amp to 220v & 4amp ac current
so I went to buy one but they asked me for the inverter number and they didn't understand what i said (the last characteristics)
so what is the number of the inverter
can anyone help me?
thanks in advance
 
Engineering news on Phys.org
moh_89 said:
Hi there
I need an inverter to convert a dc current of 24v and 40amp to 220v & 4amp ac current
so I went to buy one but they asked me for the inverter number and they didn't understand what i said (the last characteristics)
so what is the number of the inverter
can anyone help me?
thanks in advance

Maybe they just wanted to know the model number? Where did you try to buy the inverter? Did you see the one you wanted there?
 
moh_89 said:
Hi there
I need an inverter to convert a dc current of 24v and 40amp to 220v & 4amp ac current
so I went to buy one but they asked me for the inverter number and they didn't understand what i said (the last characteristics)
so what is the number of the inverter
can anyone help me?
thanks in advance

Check these people out, they should have what you need. If you need it quick they can ship overnight or next day ( for an extra fee).
I have used them before and have been happy with their service.

http://www.invertersrus.com/index.html
 
RonL said:
Check these people out, they should have what you need. If you need it quick they can ship overnight or next day ( for an extra fee).
I have used them before and have been happy with their service.

http://www.invertersrus.com/index.html

Inverters R Us :smile:

That's hilarious!
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Back
Top