Instantaneous Power (Mastering Physics)

AI Thread Summary
To find the instantaneous power generated by a force of 600 N on a sled accelerating at 0.08 m/s² after 10 seconds, the velocity at that time is calculated to be 0.8 m/s. The relevant formula for power is P = Fv, which can be used to determine instantaneous power. The discussion emphasizes the distinction between average power and instantaneous power, noting that the latter requires the use of instantaneous values for force and velocity. Participants suggest that the approach taken is correct, and reference to additional resources is provided for further clarification. The focus remains on accurately applying the physics principles to solve the problem.
ren0x
Messages
2
Reaction score
0

Homework Statement




Let us now consider several questions that include numeric data.

A sled is being pulled along a horizontal surface by a horizontal force F of magnitude 600 N. Starting from rest, the sled speeds up with acceleration 0.08 m/s2 for 1 minute.

Find the instantaneous power P created by force F at t=10s.

Express your answer in watts to three significant figures.

Homework Equations



Pavg = \frac{\Delta W}{\Delta t}
P = \frac{dW}{dt}

The Attempt at a Solution


I have solved for velocity after 10s.

v = 0.8 m/s

I'm stuck at where to go from here.
 
Physics news on Phys.org
Do not forget that Power can also be expressed as P = Fv
 
Mattowander said:
Do not forget that Power can also be expressed as P = Fv

If I'm not mistaken, that is the formula for Pavg. I am trying to solve for the instantaneous power, unless you know something I don't.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top