What Is Thermopaste & What Does It Do?

  • Thread starter Thread starter sheikhfahad
  • Start date Start date
AI Thread Summary
Thermal paste, often referred to as thermopaste, is a substance applied between a processor chip and a heatsink to enhance heat transfer efficiency. It minimizes air gaps, ensuring better thermal conductivity and preventing overheating. The discussion also raises the question of whether thermal paste serves the same function as silicone greases, which are used for similar thermal management purposes. Applying thermal paste to a surface can help retain heat, preventing loss to the environment. Understanding these materials is crucial for effective temperature measurement in experiments.
sheikhfahad
Messages
8
Reaction score
0
i am doing an experiment to measure the temperature of the surface of the filament, i using thermocopule, my teacher told me to use thermopaste on bulb to measure the temperature. Can some 1 tell me what thermopaste is and what does thermopaste do.
thanks
 
Physics news on Phys.org
thermo or thermal paste?
I have heard of thermal paste - you put it between your processor chip and the heatsink in a computer in order to increase the efficiency of the heat transfer
 
thermal paste i guse

little me said:
thermo or thermal paste?
I have heard of thermal paste - you put it between your processor chip and the heatsink in a computer in order to increase the efficiency of the heat transfer

so if i put thermal paste on the surface it would make sure that the heat of the surface is not lost to the enviroment.

Also what is thermo paste?

one more question is thermal paste same as silicon greases, meaning do they have same function.
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top