Why does a lead acid battery spark when connecting to opposite terminals

AI Thread Summary
A lead acid battery sparks when connecting opposite terminals due to a momentary capacitor effect, where electrons attempt to flow from the anode to the cathode, creating an arc. When the anode is grounded to a vehicle chassis, electrons do flow through the circuit to power the load and return via the chassis metal. The chassis serves as a convenient conductor, although it is not the most efficient option compared to copper wiring. The sparking occurs just before the connection is made, illustrating the rapid movement of electrons. Understanding these principles clarifies the behavior of lead acid batteries in practical applications.
Edible Planet
Messages
1
Reaction score
0
Sorry about the intrusion as I really don't belong here as I have absolutely no background in physics but I have a couple of questions regarding lead acid batteries that I have been unable to find answers to on the internet.

First question - why does a battery spark/arc when the negative is hooked directly up to the positive. I had thought that the electron imbalance on the cathode was seeking to balance out by "getting" to the anode and it seems that hooking up the cathode directly to the anode would most easily satisfy this imbalance.

Second question - When the anode is grounded to a vehicle chassis how do the electrons get from the cathode to the anode to balance the battery. Do they flow through the circuit, power the load and then return through the metal of the chassis? And if so how does the metal of the chassis not become polarized by the charge of the electrons as they move through it? Or are the electrons just moving through a field around the chassis to return to the anode. Very confusing! Can anyone give me a good explanation.

Thanks,

Scott
 
Physics news on Phys.org
For your first question, the sparking only occurs just before the wire from one end is connected to the other. You are effectively creating a capacitor for a moment. During this, electrons from the anode tries to flow to the cathode and arcs through the air, so you'll have a very tiny lightning bolt.
 
Edible Planet said:
Sorry about the intrusion as I really don't belong here as I have absolutely no background in physics but I have a couple of questions...

Intrusion? Not at all!
This site is open to everyone on the planet regardless of educational background.
As long as one posts specific questions and follows forum guidlines all is good and beneficial to us all.

Please feel most welcome here at PF!
 
Edible Planet said:
Do they flow through the circuit, power the load and then return through the metal of the chassis? ?

Yes. The sheet metal car chassis is just "convenient", not meant to be "ideal" for current flow. One "could" put more efficient copper wires connecting everything, but there is no need for that in most cases, hence the sheet metal of the car chassis is used.
 
So I know that electrons are fundamental, there's no 'material' that makes them up, it's like talking about a colour itself rather than a car or a flower. Now protons and neutrons and quarks and whatever other stuff is there fundamentally, I want someone to kind of teach me these, I have a lot of questions that books might not give the answer in the way I understand. Thanks
I am attempting to use a Raman TruScan with a 785 nm laser to read a material for identification purposes. The material causes too much fluorescence and doesn’t not produce a good signal. However another lab is able to produce a good signal consistently using the same Raman model and sample material. What would be the reason for the different results between instruments?
Back
Top