Small Tracking Devices: Dog Trackers .5 Mile & Smaller

  • Thread starter Thread starter tbone301
  • Start date Start date
  • Tags Tags
    Tracking
AI Thread Summary
A user is seeking a small tracking device for dogs that can operate over a range of 0.5 miles or more, ideally the size of a watch battery or smaller. Concerns are raised about the limited signal range in hilly or wooded terrains, suggesting that existing wildlife tracking devices may be a viable option. GPS recording trackers are mentioned for post-retrieval mapping, but they do not assist in real-time tracking. Various links to wildlife tracking systems are shared, highlighting the importance of line-of-sight for effective signal transmission. The discussion concludes with a desire for a real-time tracking solution that fits within a compact size, similar to that of a pencil.
tbone301
Messages
4
Reaction score
0
Does anyone know of a very small tracking device or tag that can be tracked .5 mile or more and the size of watch battery or smaller. I looking for such a device for dog tracking.
 
Engineering news on Phys.org
That sounds pretty small to have much range. Especially if the dog can be in the woods or over a hill, it will be pretty hard to get much signal out to a receiver. Your best bet might be to look at the existing animal tracking devices that are used by the Fish and Game folks for wildlife tracking.

I googled wildlife tracking systems, and got lots of good hits. Here's the hit list:

http://www.google.com/search?source...T4SUNA_en___US232&q=wildlife+tracking+systems

Interesting, if you are just interested in where the dog has been, you can use a GPS recording tracker, and upload the information after the dog comes back. That's no help if you're trying to find the dog, of course.

Hmmm, one of the first hits on the list is for a UK company that originally made RF tracking devices for falcons in the Middle East. Having the falcon up in the air (and not over a hill) makes for better line-of-sight RF propagation, but still, these transmitters are tiny!

http://www.wildlifetracking.co.uk/tx.htm

Hope that helps. Welcome to the PF, BTW.
 
Last edited by a moderator:
Thanks for the information. The link shows the transmitter but does this tranmitter have to have a line of sight to work? The terrain is hilly and sometimes dense woods. Do you think that product may work? Do you know of any type of GPS or GMS systems?
 
Last edited:
GPS would only be for mapping the dog's path after you get him back -- it's a receive-only device that the dog wears.

This link out of the google hit list looks to be a pretty good source of information about dog tracking collars:

http://wildlifematerials.com/dog/faq.php?q=2

The frequencies that I see being mentioned in the links in the hit list are mainly VHF and UHF frequencies, which are basically line-of-sight, and won't carry over the tops of hills. However, in the link above, they claim their system works to about 2 miles "in adverse conditions" whatever that is -- maybe raining in the woods? You might try giving their Customer Service folks a call to get more information. You might even be able to get some references of satisfied customers from them, and give them a call to talk about how well the system works.

I've noticed in many of the links that these systems are pretty pricey, though. You may need to do some shopping around to find some lower-priced systems.
 
Last edited by a moderator:
I really would like to try to find something real time that I can watch on a hand held unit. sort of like a gps for a car, when driving my vehicle I can see my movement. I indicated earlier the size of a watch battery but I think my cylinder I can use will accomadate the size of a pencil. Any such device availible out there.
 
I gave this some thought how big are the gps that are in the cell phones. They have to be small? Anyone know?
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top