Power transformer in Maxwell 2D

AI Thread Summary
A user is seeking instruction files for designing a power transformer in Maxwell 2D and for the electrical circuit in Maxwell Circuit Editor. The forum moderator advises against sharing personal email addresses publicly to avoid spam. Participants express concern that the request may be related to homework and ask for clarification on the user's specific application. The discussion emphasizes the need for guidance on transformer design within the software. Overall, the user is looking for assistance in obtaining relevant instructional materials.
omid.tokallou
Messages
2
Reaction score
0
hi every one
I want an instruction file about design power transformer in Maxwell 2D and i want an instruction file about electrical circuit of power transformer in maxwell circuit editor
please help me
<< e-mail address deleted by Moderator -- please use PMs instead >>
please send me
thanks a lot
 
Last edited by a moderator:
Engineering news on Phys.org


omid.tokallou said:
hi every one
I want an instruction file about design power transformer in Maxwell 2D and i want an instruction file about electrical circuit of power transformer in maxwell circuit editor
please help me
<< e-mail address deleted by Moderator -- please use PMs instead >>
please send me
thanks a lot

Welcome to the PF, Omid. We discourage the posting of personal e-mail addresses in the open forums because it attracts spam bots. I've edited your e-mail address out of your post.

People can reply here in your thread, or they can send you a PM to establish e-mail contact if it is necessary for getting you the files.
 
request

hi every one
I want an instruction file about design power transformer in Maxwell 2D and i want an instruction file about electrical circuit of power transformer in maxwell circuit editor
please help me
please send me
thanks a lot
 


sounds like homework to me?
 


mack_10 said:
sounds like homework to me?

Good point.

omid.tokallou said:
hi every one
I want an instruction file about design power transformer in Maxwell 2D and i want an instruction file about electrical circuit of power transformer in maxwell circuit editor
please help me
please send me
thanks a lot

Omid, what is the application? What is it that you are trying to do?
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Maxwell Ansoft and Circuit Editor
Replies
1
Views
3K
Open circuit test of 3 phase transformer in Ansys Maxwell
Replies
4
Views
5K
Ansys Maxwell Modeling of Switched Reluctance Motors
Replies
4
Views
3K
"Ground" and "Center Tapped" Power Transformer Secondary in guitar amp
Replies
6
Views
3K
Help with building this transformer in ltspice
Replies
21
Views
4K
How simulate a transformer with Maxwell Ansoft?
Replies
44
Views
26K
Transformer without separate primary and secondary windings....
Replies
14
Views
3K
How to incorporate core losses in an ANSOFT 2D transformer model
Replies
4
Views
3K
Designing Your Own Transformer for Electrical Engineers
Replies
13
Views
3K
Why Isn't My Coil Simulation Achieving the Expected 8pT Signal in Maxwell?
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top