Why Does the Firing Angle Equation for FC-TCR Not Work in MATLAB?

  • Thread starter Thread starter rahil123
  • Start date Start date
  • Tags Tags
    Angle Logic
AI Thread Summary
The discussion centers on the issue of the firing angle equation for a thyristor controlled reactor (TCR) connected in parallel with a fixed capacitor, which is not yielding valid results in MATLAB. Users are seeking assistance to resolve this problem, emphasizing the need for clarification on the equation's application in MATLAB. The request for additional details, including circuit screenshots and MATLAB code, indicates a collaborative effort to troubleshoot the issue. The focus remains on understanding the discrepancies in the firing angle calculations. Effective resolution of this problem is essential for accurate reactive power compensation analysis.
rahil123
Messages
3
Reaction score
0
TCR(thyristor controlled reactor) is connected in parallel with fixed capacitor to provide reactive power compensation.According to equation of firing angle in terms of susceptance is not providing valid answer in MATLAB software. please help
 
Last edited by a moderator:
Engineering news on Phys.org
rahil123 said:
TCR(thyristor controlled reactor) is connected in parallel with fixed capacitor to provide reactive power compensation.According to equation of firing angle in terms of susceptance is not providing valid answer in MATLAB software. please help

Welcome to the PF.

Could you please provide more details about your question? Can you post a screenshot of your circuit, and your MATLAB code?
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

I Feynmann's connection machine model
Replies
1
Views
3K
Triple redundancy sensor matlab code
Replies
3
Views
3K
Direct and alternating current, a personal approach to understand them
Replies
1
Views
1K
I Why should a Fourier transform not be a change of basis?
Replies
43
Views
7K
Requesting suggestions for languages, libraries, and architectures for parallel (and sometimes non parallel) numerical and scientific computations
Replies
8
Views
4K
Power Engineering Exam Practice Questions
Replies
1
Views
1K
Is Alan Turing given too much credit when it comes to computers?
Replies
29
Views
5K
B How Does an IEC Fusion Reactor Work?
Replies
19
Views
5K
Programs How good is this applied math program?
Replies
13
Views
3K
Are Ramp Length and Angle Key to Reducing Work in Physics Problems?
Replies
5
Views
5K

Hot Threads

Recent Insights

Back
Top