How Fast Does the Lighter Block Travel When the Spring Relaxes?

  • Thread starter Thread starter naianator
  • Start date Start date
  • Tags Tags
    Blocks Spring
AI Thread Summary
The discussion centers on a physics problem involving two blocks attached to a spring on a frictionless surface. The blocks are initially pulled apart and released, prompting the need to calculate the speed of the lighter block when the spring returns to its relaxed state. Momentum conservation is applied, leading to the relationship v1 = 2v2. The potential energy stored in the spring is converted into kinetic energy as the spring relaxes, resulting in the equation k*x^2 = 9*m*v1^2. The final expression for the speed of the lighter block is derived as v1 = sqrt(k*x^2/(9*m)).
naianator
Messages
48
Reaction score
1

Homework Statement


A system consists of two blocks, of masses m and 2m, attached to the ends of a massless spring with a force constant k. The system is placed on a horizontal frictionless surface. Initially, the spring is relaxed. The blocks are then pulled apart an “extra” distance x and simultaneously released from the state of rest.

problems_F12_MRI_images_MRI14.png


Find the speed v1 of the block of mass m at the instant the spring is relaxed again. Answer in terms of m, k, and x.

Homework Equations


U_spring = 1/2*k*x^2
K = 1/2*m*v^2
m_1*v_1+m_2*v_2 = m_1*v_1' + m_2*v_2'

The Attempt at a Solution


Momentum is conserved and initially 0 so

m*v_1 = 2m*v_2

and

v_1 = 2v_2

Potential energy in the compressed spring is equal to 1/2*k*x^2 and when the spring reaches equilibrium the potential is 0 and the kinetic energy is equal to 1/2*m*v_1^2+1/2*(2m)*(2v_1)^2 so

1/2*k*x^2 = 1/2*m*v_1^2+4*m*v_1^2

= k*x^2 = m*v_1^2+8*m*v_1^2

= k*x^2 = 9*m*v_1^2

and finally

v_1 = sqrt(k*x^2/(9*m))

Where am I going wrong?
 
Physics news on Phys.org
If ##v_1 = 2v_2##, then why is ##\frac{1}{2}kx^2 = \frac{1}{2} mv_1^2+4mv_1^2##?
 
  • Like
Likes naianator
naianator said:
v_1 = 2v_2

naianator said:
1/2*m*v_1^2+1/2*(2m)*(2v_1)^2

You substituted 2v1 for v2.
 
  • Like
Likes naianator
AlephNumbers said:
You substituted 2v1 for v2.
Yes! Thank you
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top