A car travelling at 50km/h stops in 70.0m HELP

  • Thread starter Thread starter lozah
  • Start date Start date
  • Tags Tags
    Car
AI Thread Summary
A car traveling at 50 km/h stops in 70 m, and the question is how far it would stop if its speed increases to 90 km/h. The relationship between speed and stopping distance is quadratic; doubling the speed quadruples the stopping distance. By applying this principle, the stopping distance for 90 km/h can be calculated as approximately 226.8 m. The discussion also emphasizes using kinematic equations or energy principles to derive the stopping distance mathematically. Overall, understanding the relationship between speed and stopping distance is crucial for solving the problem.
lozah
Messages
5
Reaction score
0

Homework Statement



A car traveling at 50.0 km/h stops in 70.0 m. What is the stopping distance if the car's speed is 90 km/h?


Homework Equations



This is a question in the unit about momentum & energy, so most of the questions have been applying formulae about momentum, work, gravitational potential energy, kinetic energy, etc. I'm confused as to how this question relates to this section because I can't seem to find an applicable formula.

The Attempt at a Solution



I attempted to solve this using ratios and got an answer of 126 m, but the real answer is somewhere around 2.3E2 m. I'm super confused, but expecting that it'll be a super obvious solution...?
 
Physics news on Phys.org
OH! Maybe I figured it out. Since doubling velocity QUADRUPLES the stopping distance (because 2^2 = 4), and the velocity was increased by 1.8, I can square 1.8 (1.8^2 = 3.24) and multiply 3.24 by 70.0 to get 226.8! Does anyone know how I could show this in a more mathematical way?
 
You can also see it in terms of the v-t graph.
Model the car as stopping with a constant acceleration ... this is a line on your graph with a negative slope - so it makes a triangle with the v and t axes. The area inside this triangle is the distance to stop.

Sketch the graph for both situations, then you have two similar traingles - don't let the time to stop T being unknown phase you - what's important is that the acceleration is the same each time.

If you prefer to memorize equations - the equations you want are the kinematic or "suvat" equations.
You want the one that relates displacement to velocity and acceleration.
 
I was going to suggest writing two energy equations using..

Work = Force * distance = 0.5mV2

eg

F * D1 = 0.5mV12

F * D2 = 0.5mV22

Substitute for F.
The mass will cancel.
 
lozah said:
OH! Maybe I figured it out. Since doubling velocity QUADRUPLES the stopping distance (because 2^2 = 4), and the velocity was increased by 1.8, I can square 1.8 (1.8^2 = 3.24) and multiply 3.24 by 70.0 to get 226.8! Does anyone know how I could show this in a more mathematical way?
I like your approach here.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top