A Flexible chain between two hooks (statics)

  • Thread starter Thread starter pegasus24
  • Start date Start date
  • Tags Tags
    Chain Statics
AI Thread Summary
The discussion focuses on a problem involving a flexible chain weighing 41.0 N suspended between two hooks at the same height, with each hook making an angle of 41.5° with the horizontal. The user attempts to calculate the force exerted by each hook, initially assuming that the weight is evenly distributed and using the equation Rh = Tsinθ. However, the calculation of Rh as 27.17 N is identified as incorrect, prompting questions about the distribution of weight and the correct approach to the problem. The user seeks clarification on how to properly account for the forces and tensions involved in the scenario. The thread highlights the importance of correctly applying static equilibrium equations to solve for forces in systems with multiple supports.
pegasus24
Messages
14
Reaction score
0

Homework Statement


A flexible chain weighing 41.0 N hangs between two hooks located at the same height. At each hook, the tangent to the chain makes an angle θ = 41.5° with the horizontal.
(a) Find the magnitude of the force each hook exerts on the chain.
(b) Find the tension in the chain at its midpoint.

Homework Equations


Fx = 0
Fy = 0
M = 0

The Attempt at a Solution


Let the magnitude of force each hook exerts be Rh.
Then Rh = Tsinθ = Wsinθ = 27.17 N
But this is wrong. What is my mistake in this calculation?
 

Attachments

  • p12-19.gif
    p12-19.gif
    5.4 KB · Views: 538
Physics news on Phys.org
There are two hooks and assuming the weight is distributed evenly then how much of the weight is supported by each hook?
 
I took the weight as 41/2 but the calculation is still wrong..
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Find Forces at Hooks on 42N Flexible Chain
Replies
3
Views
8K
Find the Tension in a Flexible Chain Resting on a Cone
Replies
2
Views
3K
What Determines the Force Between Links in a Chain Under Acceleration?
Replies
4
Views
2K
Tension at the lowest point of a hanging chain
Replies
2
Views
5K
Statics and friction -- Two articulated rods connected to blocks
Replies
13
Views
2K
What is the force exerted by a falling chain on a table?
Replies
2
Views
4K
What is the Force Between Links in a Falling Chain?
Replies
2
Views
3K
What is the acceleration and velocity of a falling chain on a cylinder?
Replies
6
Views
3K
Torque of Pulley with Two Masses2
Replies
6
Views
2K
What is the force exerted by each hinge on the door?
Replies
3
Views
13K

Hot Threads

Recent Insights

Back
Top