A rope hanging over edge of table.

  • Thread starter Thread starter myaaxcore
  • Start date Start date
  • Tags Tags
    Edge Rope Table
AI Thread Summary
The problem involves calculating the fraction of a rope that can hang over a table's edge without slipping, given a static friction coefficient of 0.3. To solve it, one must equate the frictional force acting on the rope on the table to the gravitational force acting on the hanging portion. The frictional force is determined by the weight of the rope on the table, while the gravitational force depends on the length of the rope hanging off the edge. It is emphasized that the mass or length of the rope is not necessary for the solution, as only the gravitational force and the coefficient of friction are relevant. A diagram illustrating the forces can aid in understanding the problem better.
myaaxcore
Messages
9
Reaction score
0
The coefficient of statis friction between a rope and the table on which it rests is 0.3. Find the fraction of the rope that can hang over the edge of the table before it begins to slip.

This is an extra credit problem so we haven't learned this yet. I don't know where to start but I'm guessing that to find that fraction of the rope, you need the mass,the weight and the gravitational force and stuff??
cluless >.< please help.
 
Physics news on Phys.org
Rope hanging over edge of table.

question
The coefficient of static friction between a rope and the table on which it rests is 0.3. Find the fraction of the rope that can hang over the edge of the table before it begins to slip.

Equation/ attempt at solution
well, i googled this question and the equation i came up with was
(0.3)(M-n[M/L])g=[n M/L]g .

But as this is an extra credit problem and we haven't learned this yet, I am not sure what I'm doing.
Clueless, please please help.
 


Draw a diagram of the forces.
You have a weight pulling down on the hanging part, how will this weight depend on the length?
This is balanced by the friction on the table part, friction = 0.3 * downward force (ie the weight of the part still on the table)

If you think carefully the actual weight/metre of the rope doesn't matter, can you see why
 
you don't need to now the length or mass of the rope to solve this. Only gravity and the coefficient of friction are needed.
To solve you need to set the force of friction equal to the force of gravity.
Keep in mind only the portion of the rope on the table will contribute to the force of friction and only the part off of the table will contribute to the force of gravity.
 
Moderator's note: two threads merged into one.

Note to myaaxcore: please do not start multiple threads to ask the same question.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top