A simple plumbing problem? How about a design flaw.

  • Thread starter Thread starter Astronuc
  • Start date Start date
  • Tags Tags
    Design
AI Thread Summary
A plumbing issue caused the Galileo satellites to be launched into incorrect orbits, highlighting the importance of rigorous design processes and independent reviews to prevent costly errors. Despite these precautions, such mistakes can still occur due to systemic issues like the NIH syndrome. The satellites have since been repositioned to more functional orbits, though they remain suboptimal. This incident underscores the need for continuous learning from past failures in aerospace design. The discussion emphasizes that even with thorough planning, unforeseen problems can arise.
Astronuc
Staff Emeritus
Science Advisor
Gold Member
Messages
22,368
Reaction score
7,209
A Simple Plumbing Problem Sent Galileo Satellites Into Wrong Orbits
http://spectrum.ieee.org/tech-talk/...lem-sent-galileo-satellites-into-wrong-orbits

There is a reason we have design processes, with independent reviews, and detailed simulations. The idea is to avoid silly, but very costly mistakes. In theory, we learn from past mistakes, nevertheless . . . .
 
Engineering news on Phys.org
Astronuc said:
A Simple Plumbing Problem Sent Galileo Satellites Into Wrong Orbits
http://spectrum.ieee.org/tech-talk/...lem-sent-galileo-satellites-into-wrong-orbits

There is a reason we have design processes, with independent reviews, and detailed simulations. The idea is to avoid silly, but very costly mistakes. In theory, we learn from past mistakes, nevertheless . . . .

Unfortunately, no amount of independent review, detailed simulations, or design processes provide immunity to the NIH syndrome. :frown: :wink: o_O

There's a recent postscript to the story in the OP.

http://spectrum.ieee.org/tech-talk/...rbits-of-errant-galileo-navigation-satellites

Apparently, the two satellites have been moved to better, though not ideal, orbits, which will allow them to function as part of the Galileo navigation system.
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Back
Top