Acceleration of Space Shuttle at Lift Off

AI Thread Summary
The discussion centers on calculating the acceleration of a space shuttle at lift-off, given its mass of approximately 2.0 x 10^6 kg and an initial thrust of 1.2 x 10^7 N. Participants identify that the thrust value provided is incorrect, as the actual thrust at lift-off is significantly higher due to the combined force of the Space Shuttle Main Engines and Solid Rocket Boosters, totaling around 30,250,000 N. Using the correct thrust, the resultant force is calculated to be 10,650,000 N, leading to an acceleration of approximately 5.3 m/s², which is not among the provided answer choices. The conversation highlights the importance of accurate data in physics problems and the potential for multiple incorrect answers when initial parameters are flawed.
NatalieWise123
Messages
14
Reaction score
0

Homework Statement



The mass of a space shuttle is approximately 2.0 x10^6 kg. If the thrust provides a force of 1.2 x 10^7 N, what is the acceleration of the space shuttle at lift off?
6.0 m/s2
0.06 m/s2
1.67 m/s2
0.167 m/s2

Homework Equations


Resultant force = thrust – weight
Acceleration = resultant force ÷ mass

The Attempt at a Solution


Weight: 2.0 x10^6 kg*9.8=19600000
Resultant Force: 1.2 x 10^7 N-19600000=-7600000
Acceleration: -7600000/2.0 x10^6 kg= -3.8 m/s^2
Not a choice and a negative acceleration
 
Last edited:
Physics news on Phys.org
NatalieWise123 said:

Homework Statement



The mass of a space shuttle is approximately 2.0 x10^6 kg. If the thrust provides a force of 1.2 x 10^7 N, what is the acceleration of the space shuttle at lift off?
6.0 m/s2
0.06 m/s2
1.67 m/s2
0.167 m/s2

Homework Equations


Resultant force = thrust – weight
Acceleration = resultant force ÷ mass

The Attempt at a Solution


Getting a negative acceleration.
Welcome to the PF.

Please show your work in detail so we can look for mistakes... :smile:
 
NatalieWise123 said:

Homework Statement



The mass of a space shuttle is approximately 2.0 x10^6 kg. If the thrust provides a force of 1.2 x 10^7 N, what is the acceleration of the space shuttle at lift off?
6.0 m/s2
0.06 m/s2
1.67 m/s2
0.167 m/s2

Homework Equations


Resultant force = thrust – weight
Acceleration = resultant force ÷ mass

The Attempt at a Solution


Getting a negative acceleration.[/B]
That's because you were given incorrect data for the total thrust at take off.

https://en.wikipedia.org/wiki/Space_Shuttle

The Shuttle used 3 SSME (Space Shuttle Main Engines) which provide a total thrust of 5250 kN at sea level. In addition to these, there were two Solid Rocket Boosters (SRB) which provided a thrust of 12,500 kN each.
 
SteamKing said:
That's because you were given incorrect data for the total thrust at take off.

https://en.wikipedia.org/wiki/Space_Shuttle

The Shuttle used 3 SSME (Space Shuttle Main Engines) which provide a total thrust of 5250 kN at sea level. In addition to these, there were two Solid Rocket Boosters (SRB) which provided a thrust of 12,500 kN each.

That would be a total thrust of 30,250,000 N. Then you'd do 30,250,000N-19,600,000= 10,650,000 to get resultant force.
The resultant force/mass would be: 10,650,000/2.0 x10^6 kg= 5.3 m/s^2. Right?? And that's not an answer choice.
 
NatalieWise123 said:
That would be a total thrust of 30,250,000 N. Then you'd do 30,250,000N-19,600,000= 10,650,000 to get resultant force.
The resultant force/mass would be: 10,650,000/2.0 x10^6 kg= 5.3 m/s^2. Right?? And that's not an answer choice.
There's only one correct answer. There are infinitely many incorrect answers. :frown:

I think whoever wrote this question wanted you to just divide the thrust value given in the problem by the mass of the shuttle to obtain an answer. It's just that this is one of the infinitely many incorrect answers.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top