How Can a Space Capsule Stop Rotating After a Collision?

AI Thread Summary
A space capsule rotating at 6 rev/min after a collision needs to stop its rotation quickly to ensure crew safety. The solution involves using two small jets that can eject gas at a specific rate and velocity, positioned tangentially at a distance from the rotation axis. The moment of inertia of the capsule is known, which is crucial for calculating the required angular deceleration. The discussion includes equations for angular motion and momentum, but moderators have removed complete solutions and LaTeX practice attempts. The focus remains on determining the time needed for the jets to effectively halt the rotation.
pantherfan11
Messages
1
Reaction score
0
1. The figure shows the rear view of a space capsule that was left rotating about its axis at 6 rev/min after a collision with another capsule. You are the flight controller and have just moments to tell the crew how to stop this rotation before they become ill from the rotation and the situation becomes dangerous. You know they have access to two small jets mounted tangentially, at a distance R = 3 m from the axis, as indicated in the figure. These jets can each eject 29 g/s of gas from each jet with a nozzle velocity of 800 m/s. Determine the length of time these jets must run to stop the rotation. In flight, the moment of inertia of the ship around its axis (assumed constant) is known to be 5800 kg·m2.





2. omega = alpha(time)
v = r(omega)
a = r(alpha)

3. I don't know where to start on this, my attempts would not be worth posting
 
Physics news on Phys.org
I realize this is a very old thread but I thought this was a good problem and I wanted to practise some LaTeX.

[Moderator Note] Latex and complete solution removed.
 
Last edited by a moderator:
This is indeed a very old thread, but we still do not allow complete solutions to be posted.

Please don't use the forum to practise your latex skills. Latex image generation (and storage) requires a significant proportion of the server's resources. There are several sites on the internet which do allow you to practise latex or alternatively, you could download the software yourself.
 
First of all, u need to find momentum force M caused by nozzle.
We have M=dL/dt ( L stands for linear momentum caused by the deflating gas), also dL=mvRdt . So M=mvR=800*29*10^-3=23.2
Then alpha=M/I=0.012 and so on...
[Moderator Note] Answer removed[/color]
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top