Archimedes' Principle-Gold Crown problem

  • Thread starter Thread starter mchesypoof
  • Start date Start date
  • Tags Tags
    Archimedes
AI Thread Summary
The discussion revolves around solving the Gold Crown problem using Archimedes' Principle. The crown weighs 60.0 N and has an apparent weight of 55.3 N when submerged in water, leading to the calculation of its average density, which is found to be 12765 kg/m³. Participants are seeking guidance on how to determine the mass percentage of gold in the crown, given the densities of gold and lead. A hint is provided to explore density ratios based on different gold-lead compositions to derive a formula for mass percent. The conversation emphasizes collaborative problem-solving and encourages sharing attempted solutions for better assistance.
mchesypoof
Messages
8
Reaction score
0

Homework Statement



You, Archimedes, suspect that the king’s crown is not solid gold but is instead gold-plated lead. To test your theory, you weigh the crown, and find it to weigh 60.0 N, and to have an apparent weight of 55.3 N when it is completely submerged in water. Take the density of gold to be 19300 kg/m3, the density of lead to be 11340 kg/m3, and the density of water to be 1000 kg/m3. Also, use g = 9.8 m/s2

(a) What is the average density of the crown?

(b) What percentage (by weight) of this crown is made of gold? The rest, we assume, is lead.


Homework Equations





The Attempt at a Solution


I found the answer to part a to be 12765kg/m^3, but haven't the slightest idea how to get the mass percent. I found the density percent, but don't know how to get mass percent from this.
 
Physics news on Phys.org
mchesypoof said:
Take the density of gold to be 19300 kg/m3, the density of lead to be 11340 kg/m3, and the density of water to be 1000 kg/m3. Also, use g = 9.8 m/s2

(b) What percentage (by weight) of this crown is made of gold? The rest, we assume, is lead.

I found the density percent, but don't know how to get mass percent from this.

Hi mchesypoof! :smile:

Hint: what would the density be if it was half lead and half gold?

if it was 25% lead and 75% gold?

can you see a pattern and a formula? :wink:
 
Yes! Thank you! It sounds so trivial now, thanks again.
 
How did you do find the average density? Anyone?
 
welcome to pf!

hi jimbo14! welcome to pf! :wink:
jimbo14 said:
How did you do find the average density? Anyone?

Show us what you've tried, and where you're stuck, and then we'll know how to help! :smile:
 
Last edited:
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top