How do I calculate the force applied to a tennis ball when it is hit by Pete?

  • Thread starter Thread starter jrbillbrian
  • Start date Start date
  • Tags Tags
    Forces
AI Thread Summary
To calculate the force applied to a tennis ball by Pete, the mass of the ball is 54 grams (0.054 kg) and it is served at a speed of 53.6 m/s over a distance of 49.7 cm (0.497 m). The initial velocity is assumed to be 0 m/s, allowing for the use of the equation Vf^2 = Vi^2 + 2a * Δx to find acceleration. After solving for acceleration, the force can be calculated using F = ma, resulting in a force of 156 Newtons. The discussion highlights the importance of correctly converting units and applying the right equations to arrive at the solution.
jrbillbrian
Messages
8
Reaction score
0

Homework Statement



Pete serves a tennis ball of mass 54 grams at a speed of 53.6 meters per second. The ball is in contact with Pete's racket through a distance of 49.7 centimeters. What force does Pete apply to the ball?

54 grams = 0.054 kg
Speed = 53.6 m/s
49.7 cm = 0.0497 m

Homework Equations


Force = mass x acceleration
Vfinal = at + vi

The Attempt at a Solution


I am VERY lost, considering the fact that our teacher told us to try and figure it any way we could.

I tried this. 0.0497 m = 0.5(53.6 m/s) * t2
t = 0.0420183500 s

Then I thought of the statement
It takes 0.0420183500 seconds to travel 0.0497 m when traveling at 53.6 m/s

Then I tried Vfinal = a*t + Vinitial
56.3 m/s = a * 0.0420183500 s

a = 1339.890784 m/s2

Force = 0.054 kg * 1339.890784 m/s/s
Force = 72.4 N

Can anyone help me out with this please?
 
Physics news on Phys.org
Since you are given the distance over which the force was applied, you should probably use an equation that has distance.

The way I read this question, you are given the following:
\Deltax = .497m
vi = 0 (<-- not given, but I'm assuming the ball wasn't moving until he hit it)
vf = 53.6 m/s

You are trying to find acceleration.

Find an equation that has \Deltax, vi, vf, and a in it, and solve for a.

Once you find acceleration, you can use the F = ma equation to find the force.

Does this make sense?
 
Yes, what you are suggesting seems to make sense. I will try it and let you know if I figure it out. Thanks
 
Thanks! I got it. One major and obvious problem that I discovered was the fact that I converted it to 0.0497 m rather than 0.497. I ended up using Vf^2 = Vi^2 + 2a * delta x
I solved for 156 Newtons. Thanks
 
jrbillbrian said:
I solved for 156 Newtons. Thanks

That's the same answer I got too. Good job! Glad to help!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Correct statement about a reservoir with outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top