Bernouli's Equation/Pressure Problem

  • Thread starter Thread starter alicemunro
  • Start date Start date
AI Thread Summary
The discussion revolves around applying Bernoulli's equation to determine the pressure difference between the air inside a truck's cargo area beneath a tarpaulin and the outside air when the truck is moving at 27 m/s. The user correctly identifies that the pressure inside the tarpaulin can be considered stationary while the air outside is moving, leading to a decrease in pressure above the tarpaulin. By rearranging Bernoulli's equation, the user calculates the pressure difference, concluding that the pressure inside exceeds the outside pressure by 470 Pa. The solution confirms the understanding of fluid dynamics and the application of Bernoulli's principle in a practical scenario. The final pressure difference calculation is validated as correct.
alicemunro
Messages
8
Reaction score
0

Homework Statement


Consider a truck with a tarpaulin on top of it. When the truck is stationary the tarpaulin lies flat, but it bulges outward when the truck is speeding down the highway. The truck is traveling at 27 m/s. The density of air is 1.29 kg/m^3. by how much does the pressure inside the cargo area beneath the tarpaulin exceed the outside pressure

Homework Equations


bernoulis:
P(1) + 1/2pv^2 = P(2) + 1/2pv^2


The Attempt at a Solution


i plugged in the density and but with two unknown pressures and one unknown velocity i don't know how you would find the difference
 
Physics news on Phys.org
and i think the pgy's on either side of the equation cancel out because this is horizontal, so y=0.
 
I would consider the air inside the truck (under the tarpaulin) as stationary.
You can imagine the truck at rest and someone blowing some air on the outside.
 
When the truck is traveling at 27 m/s, the air above the tarpaulin is moving with the same velocity but in the opposite direction. The pressure inside this blowing air decreases. In side the tarpaulin air is at rest.
 
so if the air inside the tarpaulin can be considered stationary, you can use P(2) = P(1) + pgh. And the pgh would = 0, so the pressure inside would equal 1 x 10^5 Pa?
 
AH oh wait is this how you solve it:

P(1) + 1/2pv^2 = P(2) + 1/2pv^2
P(1) - P(2) = 1/2p(v2^2 - v1^2)
P(1) - P(2) = 1/2(1.29)(27^2 - 0^2)
P(1) - P(2) = 470 Pacorrect??
 
Correct.
 
thanks profusely
 
Back
Top