Bitumen Polymer: Is it a Polymer?

  • Thread starter Thread starter selseg
  • Start date Start date
  • Tags Tags
    Polymer
AI Thread Summary
Bitumen is not classified as a polymer; it is a complex mixture of hydrocarbons derived from crude oil, primarily consisting of residues left after lighter fractions are removed. The components of bitumen include saturates, aromatics, resins, and asphaltenes. While there is a significant concentration of polycyclic aromatic compounds (PCAs) in bitumen, these do not qualify as polymers since they lack the characteristic repeating units found in polymer structures. The initial confusion arose from the presence of long-chain hydrocarbons in bitumen, but further clarification indicates that these do not meet the criteria for polymer classification.
selseg
Messages
32
Reaction score
0
Hey
I am trying to find out if bitumen is a polymer, and if it is please direct me to resources where I could see its structure.Thanks
 
Chemistry news on Phys.org
Bitumen is a highly heterogeneus mixture of hydrocarbons, so yes, it is composed of polymers. From a quick look online, it looks like bitumen can be divided into the chemical families of saturates, aromatics, resins, asphaltenes; this might help your search.
 
I didn't know hydrocarbons were polymers, I only knew polymers could be synthesized from hydrocarbons.How then does bitumen become a polymer.Im a little confused
 
That's because I misspoke. Polymers consist of many repeating units, often hydrocarbon units, and I assumed that bitumen's many components would include some examples of long chains. However, I can't find evidence that any molecule in bitumen contains hundreds of units or more, so I shouldn't have said it was composed of polymers. Sorry about the error.
 
Thanks
 
No it isn't a polymer.
Bitumen is a mixture of various residues from crude oil that remain after the lighter fractions are extracted for such things as petrol (gasoline), fuel oils and the various paraffinics that go on to be used in such applications as lubricants.
There is quite a large concentration of PCAs in bitumen, but these cannot be classified as polymers as their molecules do not have multiple repeating units.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top