Calculate Sin(A+B) with CosA= 1/3 and SinB=1/4: Check My Work

  • Thread starter Thread starter majinknight
  • Start date Start date
AI Thread Summary
To calculate sin(A+B) given CosA=1/3 and SinB=1/4, the initial formulation is correct: Sin(A+B) = SinACosB + CosASinB. The user correctly derived the components of the triangles for angles A and B, leading to the expression sin(A+B) = (√8/3)(√15/4) + 1/12. However, there was a notation error in the final answer, which should be expressed as (√120 + 1)/12 instead of √120 + 1/12. Additionally, a point was raised about the sign of CosB, suggesting it should be negative for the specified range of angle B.
majinknight
Messages
53
Reaction score
0
Ok So i finished my questions and was wondering if someone could check my work to see if i did it right.
Question: If CosA= 1/3, with 0<A<pie/2, and SinB=1/4, with pie/2<B<pie, Calculate sin(A+B)

My Solution:

Sin(A+B)= SinACosB + CosASinB
=SinACosB + (1/3)(1/4)
SinACosB + 1/12

Ok Now i drew Triangle A and labeled the bottom 1 and hypotaneous 3. Then used the theorum to get the last side is square root 8.
I made Triangle B and labelled hypotaneous 4, adjacent side being 1 and used theorum to get the opposite side to be square root of 15.

=(square root8/3)(square root15/4) +1/12
=(square root120/12) + 1/12
to get my final answer of squareroot 120 +1 /12.

Is that correct?
 
Physics news on Phys.org
Ouch! Your trigonometry is excellent- your notation is horrible!

You are exactly right (and for the right reasons!) that
sin(A+B)= =(&radic;(8)/3)(&radic;(15)/4) +1/12

but then you seem to have lost control of your parentheses.

sin(A+ B)= &radic(120)/12+ 1/12
= (&radic(120)+ 1)/12

which is not the same as &radic(120)+ 1/12 which is how I would have interpreted "squareroot 120 +1 /12".

It's not your use of "squareroot" instead of &radic; I am complaining about- it's your use of parentheses.

(squareroot(120)+ 1)/12 would be a correct answer.
 
shouldn't cosB be negative for \frac{\pi}{2}&lt;B&lt; \pi
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top