Calculate Speed: 10m in 15s | Is My Answer Correct?

  • Thread starter Thread starter BUTTER-BENZ
  • Start date Start date
AI Thread Summary
The calculation of speed for traveling 10 meters in 15 seconds results in approximately 0.67 m/s, confirming that the initial answer of 0.666667 m/s is correct. The formula used is speed = distance/time, which simplifies to 10m/15s. It's important to ensure that units are consistent throughout the calculation. The discussion emphasizes the significance of checking both numbers and units for accuracy. Overall, the answer provided is validated as correct.
BUTTER-BENZ
Messages
14
Reaction score
0
Is my answer correct??

calculate using this formula

speed = distance
_______
time



my first answer is :

travelled 10meters in 15 seconds = .666667 m/s

is this correct?

or would it be..

.666667 = 10
___
15
 
Physics news on Phys.org


distance
_______
time ***


&


10
__
15 ***
 


BUTTER-BENZ said:
calculate using this formula

speed = distance
_______
time



my first answer is :

travelled 10meters in 15 seconds = .666667 m/s

is this correct?

or would it be..

.666667 = 10
___
15

"travelled 10meters in 15 seconds = .666667 m/s" is correct. Just look at the units, and carry them along in your calculation. 10m/15s = 0.67m/s -- do the math on the units as well as the numbers, and use that to check that you've done the math correctly.
 


BUTTER-BENZ said:
calculate using this formula

speed = distance
_______
time



my first answer is :

travelled 10meters in 15 seconds = .666667 m/s

is this correct?
correct
marlon
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top