Calculate Tension in Cables Using Pythagorus Formula

  • Thread starter Thread starter mratwi36
  • Start date Start date
  • Tags Tags
    Cables Tension
AI Thread Summary
To calculate the tension in cables using the Pythagorean theorem, it is essential to first establish the angles and hypotenuse, which are already determined. With a hypotenuse of 23.3 m and angles of 31 and 59 degrees, the next step involves applying trigonometric functions to resolve the forces. Understanding that a system in mechanical equilibrium requires the vector sum of forces to equal zero is crucial for this calculation. Using sine and cosine functions will help derive the tension values from the known angles and hypotenuse. Proper application of these principles will yield the required tension in the cables.
mratwi36
Messages
8
Reaction score
0
Well I've found the angles and got the hypotenuse by Pythagorus formula, but I'm kinda stuck i don't know what formula should i use to get the tension in cables.

Hyp=23.3 m
angles based on triangle AB we already have the 90 deg based on right angle triangle and the other angles are 31 and 59.

since I've got those what am i supposed to do after that.

appreciate all the help.
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    26.7 KB · Views: 543
Physics news on Phys.org
Last edited by a moderator:
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Maximum tension in a cable holding a drawbridge
Replies
5
Views
2K
Tension and net torque in a cable
Replies
10
Views
5K
Weight held by a beam and cable
Replies
2
Views
1K
Find the tension in the cable and the force the ramp exerts on the tires
Replies
8
Views
5K
What Are the Tensions in Each Cable of a Suspension Bridge?
Replies
31
Views
4K
What is the Tension in Each Cable Supporting the Lamp?
Replies
6
Views
10K
How do I calculate the tension in cable 1 without using the tension in cable 2?
Replies
2
Views
5K
Calculating Linear and Angular Motion in a Drum and Cable System
Replies
6
Views
5K
Solve Tension in Cables (T1, T2, θ3)
Replies
4
Views
9K
How Do You Calculate the Tension in a Cable Supporting a Boom at an Angle?
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top