How Do You Calculate the Angular Momentum of a Rotating Bat?

AI Thread Summary
To calculate the angular momentum of a rotating bat, the moment of inertia must be correctly determined. The bat should be approximated as a long thin cylinder rather than a point mass at the end. The correct formula for moment of inertia is I = (1/3)mr^2 for a rod rotating about one end. Using this, the angular momentum can be calculated with L = Iω, where ω is the angular velocity. Properly applying these formulas leads to the correct solution for the problem.
Exustior
Messages
2
Reaction score
0

Homework Statement


A batter swings a 0.9 m long bat. Calculate the angular momentum of the bat relative to its axis of rotation. Assume the bat has a mass of 0.6 kg and rotates at 3 rad / s
(Hint: Approximate the bat by a rod, or a long thin cylinder, and find the moment of inertia.)
Answer in (N m)

Homework Equations


I=mr^2
ω=v/r
v=ωr
L=Iω

The Attempt at a Solution


L=Iω
I=mr^2
so L=(0.6)(.9^2)(ω)
ω=angular velocity is 3 rad/s
so L=(.6)(.9^2)(3rad/s)= Wrong answer
 
Last edited:
Physics news on Phys.org
Hey, welcome to physicsforums!
uh, the moment of inertia formula you have used is not correct for this problem. The inertia I=(0.6)(0.9)^2 would suggest the mass of the bat is concentrated at the end of the bat. But it looks like they want you to assume the bat is a long thin cylinder, of uniform density. So either you can look up the moment of inertia for this kind of object, or derive it yourself, if you have time.
 
BruceW said:
Hey, welcome to physicsforums!
uh, the moment of inertia formula you have used is not correct for this problem. The inertia I=(0.6)(0.9)^2 would suggest the mass of the bat is concentrated at the end of the bat. But it looks like they want you to assume the bat is a long thin cylinder, of uniform density. So either you can look up the moment of inertia for this kind of object, or derive it yourself, if you have time.
Thanks!
I got it I was using the wrong formula.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top