Calculate Wave Amplitude for T, u, lambda, g

  • Thread starter Thread starter hotmail590
  • Start date Start date
  • Tags Tags
    Amplitude Wave
AI Thread Summary
To determine the minimum wave amplitude required for the ant to become momentarily weightless, the relationship between tension (T), mass per unit length (u), wavelength (λ), and gravitational acceleration (g) must be established. The amplitude (A) can be derived from the wave function of a traveling wave, specifically using the formula for wave motion. It is noted that the amplitude represents the maximum displacement from the rest position. The discussion also highlights the importance of understanding wave properties and their effects on objects like the ant. The thread concludes with a reference to a related problem for further assistance.
hotmail590
Messages
52
Reaction score
0
A large ant is standing on the middle of a circus tightrope that is stretched with (T) tension . The rope has mass per unit length (u). Wanting to shake the ant off the rope, a tightrope walker moves her foot up and down near the end of the tightrope, generating a sinusoidal transverse wave of wavelength (lamda) and amplitude (A) . Assume that the magnitude of the acceleration due to gravity is (g).

What is the minimum wave amplitude such that the ant will become momentarily weightless at some point as the wave passes underneath it? Assume that the mass of the ant is too small to have any effect on the wave propagation.
Express the minimum wave amplitude in terms of T, u, lamda, and g.


How should I approach this problem? Should I try to find a forumla for Amplitude and plug in 0 for the mass/length (u)??


For the wave function of a traveling wave Asin[(k)x+(w)t] on a thin rope that what way can we determine the amplitude?

I know the amplitude is the height of the wave from rest to crest or rest to trough. But I cannot figure out anyway to show A.

For example like the wavelength (lamda) = 2pi/k

But what can Amplitude = ?


Thank you for your help.
 
Last edited:
Physics news on Phys.org
anyone please?
 
anyone please?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top