Calculating Acceleration and Angle on a Frictionless Air Track

  • Thread starter Thread starter jenc305
  • Start date Start date
  • Tags Tags
    Accleration Angle
AI Thread Summary
To calculate the acceleration of a cart on a frictionless air track, the formula a = 2d/t² can be used, where d is the distance traveled and t is the time elapsed. Given that the cart travels 32.0 cm in 2.0 seconds, the acceleration can be calculated as a = 2(0.32 m)/(2.0 s)², resulting in an acceleration of 0.08 m/s². The angle of the track can be determined using the relationship a = g sin(θ), where g is the acceleration due to gravity. By substituting the known values, the angle θ can be calculated. The problem was successfully solved with this guidance.
jenc305
Messages
16
Reaction score
0
Please help me with this question. I understand how to calculate the velocity from the given conditions but I don't know how to figure out the acceleration or the angle. Thanks!

A cart is released from rest at the top of a perfectly frictionless air track. After an elapsed time delta t = 2.0s, the cart has traveled delta x = 32.0 cm down the track. What is the cart's acceleration? What is the angle of theta of this track?
 
Physics news on Phys.org
The acceleration of the cart is the component of its weight parallel to the track divided by its mass so a = g \cos \theta. The distance it travels is

d = \frac {1}{2} a t^2

and you have enough information to find the acceleration and the angle.
 
I've figured out the problem with your help. Thank you!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top