Calculating Acceleration for a Monkey Lifting a Crate | Force and Motion

  • Thread starter Thread starter pinkxoxo
  • Start date Start date
  • Tags Tags
    Force Motion
pinkxoxo
Messages
13
Reaction score
0
1. THE PROBLEM: A 9 kg monkey climbs up a massless rope that runs over a frictionless tree limb and back down to a 21 kg package on the ground (Fig. 5-54).

Figure 5-54.

(a) What is the magnitude of the least acceleration the monkey must have in order to lift the package off the ground?
m/s2

Assume that after the package has been lifted, the monkey stops its climb and holds onto the rope.

(b) What is the monkey's acceleration?
m/s2
(c) What is the tension in the rope?
N


2.) MY ATTEMPTS: I figured that in order for the monkey to be able to lift the crate its acceleration should be proportional to where the monkey and crate had the same force.
F=ma=m(Monkey(9))(a)=m(Crate(21))(9.8)
a=22.876 m/s^2...according to web assign I am wrong! I can solve the other parts of the problem if I knew how to find the first acceleration
PLEASE HELP :)
 
Physics news on Phys.org
(a) To start, I would calculate what the rope tension must be in order to just start lifting the package.
 
How would i calculate that? F=ma but the only a i see given is gravity?
 
Well, to put it another way: what would be the force required to lift anything off of the ground?
 
F = ma is key. And there IS another a apart from gravity. Hmmm, what could be accelerating in the problem?
 
To solve this, I first used the units to work out that a= m* a/m, i.e. t=z/λ. This would allow you to determine the time duration within an interval section by section and then add this to the previous ones to obtain the age of the respective layer. However, this would require a constant thickness per year for each interval. However, since this is most likely not the case, my next consideration was that the age must be the integral of a 1/λ(z) function, which I cannot model.
Back
Top