Calculating Airplane Velocity with Wind: A Study

AI Thread Summary
To calculate the resultant velocity of the airplane over the ground with wind, the initial velocity of the plane and the wind's velocity must be vectorially added. For part a, the resultant velocity can be determined using vector addition, which combines the airplane's velocity and the wind's effect. For part b, to maintain the same heading and speed, the pilot needs to adjust the airplane's direction to counteract the wind's influence, effectively creating a new heading that compensates for the wind. The discussion highlights confusion regarding the adjustment needed for the airplane's heading in response to wind conditions. Understanding vector addition is crucial for solving both parts of the problem effectively.
soccer5
Messages
2
Reaction score
0

Homework Statement



An airplane is flying at [80.0, 50.0(degrees)] m/s when there is no wind. Then the wind begind to blow at [18.0, -20 (degrees)] m/s.

a) if the pilot does not change the heading of the plane what will be the resultant velocity over the ground?

b) In order to maintain the same heading and speed as before, how should the pilot now direct the plane??



The Attempt at a Solution



I know how to do part a.
But i have no clue about part b
please help??
 
Physics news on Phys.org
Any ideas/attempts?
 
no idea.
we never did anything like that in class.
 
Well, you only have to regard the "same speed and heading as before" as the resultant velocity of the plane in case b).
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top