Calculating Angle and Distance of Separation for Repelling Charged Spheres

AI Thread Summary
The discussion focuses on calculating the angle θ formed by two charged spheres after repulsion. Each sphere has a mass of 5g and is charged to +91nC, with strings of 1.0m. The key equations involve gravitational force (F = mg), electrostatic force (F = Kq1q2/r^2), and the relationship between angle and distance (sin θ = opp/hyp). Participants suggest using the relationship r = 2 sin θ to simplify the equations and eliminate unknowns. The goal is to determine the distance of separation and the angle with the vertical after the spheres repel each other.
madonset@eskom
Messages
2
Reaction score
0
1. Homework Statement []

Two spheres each of 5g, tied to 1.0m strings, repel each other after being charged to +91nC of the two spheres . What is the angle θ they form with the vertical after repulsion

Homework Equations



(1) F = mg...m=5.0g, g= 9.8m/s^2
(2) F = Kq1q2/r^2 ...q1=q2=q=+91nC, r = distance of separation after repulsion= ?,K = electrostatic constant = 9.0 x10^9 Nm^2/C^2
(3) sin θ= opp /hyp...opp = r/2, hyp = 1.0m, θ = angle with the vertical axis = ?
(4) ∑Fx = 0
(5) ∑Fy = 0

The Attempt at a Solution


I need to find the distance of separation (r) after repulsion, so I can solve for θ using the sin θ equation (3).I did the sum of the horizontal and vertical forces, using equation (4 & 5), substituted T =mg/cosθ,(obtained from the summation of vertical forces equation) in the horizontal forces equation (4) to eliminate the unknown T (tension in the string) but I get stuck with two unknowns r and θ
 
Last edited:
Physics news on Phys.org
If I understand the set up correctly, write (3) like r = 2 sin θ and use this in your ∑Fx=0 equation together with T = mg/cosθ to leave only θ.
 
@CAF123...Aaah but yes of course thank you!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top