Calculating Density of Concrete

  • Thread starter Thread starter SiCharlton
  • Start date Start date
  • Tags Tags
    Density
AI Thread Summary
To calculate the density of a concrete cube, use the formula density equals mass divided by volume. Given the weight in air (2.345 kg) and the dimensions (height 1900 mm, width 320 mm, depth 180 mm), the volume can be calculated as 0.10976 m³. The density is then calculated as 2.345 kg divided by 0.10976 m³, resulting in approximately 21300 kg/m³. While specific gravity can be considered, it is not necessary for this calculation. Accurate unit conversion and attention to buoyant effects are advised, though they may not significantly impact the result.
SiCharlton
Messages
7
Reaction score
0
Hi all,
My problem is concerning density and how to calculate it. Basically, calculating density of a concrete cube. I've been given;

Weight (kg) In Air - 2.345,2.340
In Water - 1.348, 1.360

Dimensions - Height - 1900mm
Width - 320mm
Depth - 180mm

I need to calculate the Density kg/m^3

Does it include the specific gravity etc..? I've searched google for ages but to no avail. Could it be, Weight in air/(weight in air - weight in water) to give S.G, thus 2.35...therefore a ratio 1:2.35 of water to cement. Taking density of water as 1000kg/m^3, density of concrete is 2350kg/m^3?

Any help will be really appreciated.

Thanks
Simon
 
Physics news on Phys.org
You seem to have been given rather too much information. If you have the dimensions and the weight in air then you have the density ( simply mass / volume )
Be carefull of the units.

If you wanted to be really picky you could include the bouyant effects of the air - although this wouldn't be worth it given the accuracy the dimensions are quoted to.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top