Calculating Linear Acceleration on a Rotating Record

AI Thread Summary
To calculate the linear acceleration of a point on the rim of a rotating record, the correct formula for centripetal acceleration is ac = ω²r. For a record with a diameter of 30 cm rotating at 33.5 rev/min, the radius is 0.15 m and the angular velocity is 3.49 radians/second. Using these values, the centripetal acceleration is calculated to be 1.8 m/s², which matches the book's answer. The confusion arose from misapplying the formula for radial acceleration. The discussion highlights the importance of using the correct equations in rotational motion problems.
jenavira
Messages
10
Reaction score
0
Q: What is the linear acceleration of a point on the rim of a 30-cm-diameter record rotating at a constant angular speed of 33.5 rev/min?

I seem to have all the variables and equations in hand -
r = .15m and \omega = 3.49 radians/second;
v = \omega r ;
(radial component of linear acceleration) a_r = \frac {v^2} {r} \omega^2 r

...but I get 3.29 \frac {m} {s^2} (pointing inward), and the book's answer is 1.8 \frac {m} {s^2}. Am I wrong? Is the book wrong? Did I just convert something wrong somewhere? I'm very confused.
 
Physics news on Phys.org
I got 1.8. You need to use the equation for centripetal acceleration (since the record is spinning) and that is ac= angular velocity^2 times radius. That should give you your answer!
 
*facepalm* Figured it was something simple like that. Thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top