Calculating radio station frequency given distances

  • Thread starter Thread starter aeliand
  • Start date Start date
  • Tags Tags
    Frequency Radio
AI Thread Summary
The discussion revolves around calculating the frequency of a radio station using the interference pattern created by two transmission towers. The towers are 175 meters apart and located 25 kilometers from the observer, who notes fluctuations in signal reception while driving 450 meters parallel to the line between the towers. The user attempts to apply the formula velocity = frequency * wavelength but struggles to identify the correct approach for solving the problem. A suggested method involves using the relationship between wavelength, distance between the towers, and the observed distance between signal maxima to find the wavelength, which can then be used to calculate frequency. The conversation emphasizes the application of principles from wave interference to determine the desired frequency.
aeliand
Messages
1
Reaction score
0
Sorry if I posted this in the wrong location, it seemed like the most appropriate board.

Homework Statement


As you drive down the highway, you notice that the dial on your stereo is not functioning. You have the radio tuned to a station that uses two transmission towers that are 175.0 m apart. The towers are 25.00 km from your present location. You wish to estimate the frequency setting of your radio using the interference pattern set up by two towers. You notice that the signal reception fluctuated between maximums as you drive a distance of 0.4500 km parallel to the line joining the two towers. What is the frequency of the station to which you are listening?

Homework Equations


This is supposed to test at how well we can find out data about upcoming units, so I had to guess at which equations would be most relevant since we have yet to learn them. This formula is the only one I know of that I figured would help in any way.

velocity = frequency * lambda

The Attempt at a Solution


I assumed by maximums, it means 0.45/2 on each side of the "present location", so I calculated the distance to the points from each tower.

I drew out the diagram, which made an isoceles triangle with dimensions 0.1750 km, 25 km and 25 km, then split the triangle in half to figure out the distance between the line created by the two receivers and the highway, and using Pythagorean theorem I got a value around 24.99984687 km. I then used that value to find out the distance from the maximums to the towers. From either point to the tower farthest from it, it would be 25.00179994 km away, and to the tower closest it would be 25.000225 km.

I calculated the time to reach each tower, and the values were 0.073520961 s to the closest tower and 0.073534705 s to the farthest.

I assume from here it would do something with resonance but I can not think of the correct formula to use to calculate that. I don't necessarily need a full answer, but a step in the right direction would be very helpful. Thanks in advance!
 
Physics news on Phys.org
aeliand said:
Sorry if I posted this in the wrong location, it seemed like the most appropriate board.

Homework Statement


As you drive down the highway, you notice that the dial on your stereo is not functioning. You have the radio tuned to a station that uses two transmission towers that are 175.0 m apart. The towers are 25.00 km from your present location. You wish to estimate the frequency setting of your radio using the interference pattern set up by two towers. You notice that the signal reception fluctuated between maximums as you drive a distance of 0.4500 km parallel to the line joining the two towers. What is the frequency of the station to which you are listening?

Homework Equations


This is supposed to test at how well we can find out data about upcoming units, so I had to guess at which equations would be most relevant since we have yet to learn them. This formula is the only one I know of that I figured would help in any way.

velocity = frequency * lambda

The Attempt at a Solution


I assumed by maximums, it means 0.45/2 on each side of the "present location", so I calculated the distance to the points from each tower.

I drew out the diagram, which made an isoceles triangle with dimensions 0.1750 km, 25 km and 25 km, then split the triangle in half to figure out the distance between the line created by the two receivers and the highway, and using Pythagorean theorem I got a value around 24.99984687 km. I then used that value to find out the distance from the maximums to the towers. From either point to the tower farthest from it, it would be 25.00179994 km away, and to the tower closest it would be 25.000225 km.

I calculated the time to reach each tower, and the values were 0.073520961 s to the closest tower and 0.073534705 s to the farthest.

I assume from here it would do something with resonance but I can not think of the correct formula to use to calculate that. I don't necessarily need a full answer, but a step in the right direction would be very helpful. Thanks in advance!

This is a classic two source interference problem:

The 450m is the 'delta X' distance between minima, the 25km is the 'L' distance from the source, the 175m is 'd' the slit separation for double slit intereference (think Young's exp).

Use the relation: 'lambda' over 'd' = 'delta X' over 'L' and solve for Lambda. Use this wavelength to solve for 'f' (frequency) keeping in mind that v = c = 3.0x10^8 m/s
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top