Calculating Tension Force on Diving Board with Sally's Weight | Helpful Tips

  • Thread starter Thread starter rudeted
  • Start date Start date
  • Tags Tags
    Board
AI Thread Summary
To calculate the tension force on the diving board with Sally's weight of 50 kg, additional information is needed, specifically the dimensions of the diving board and the spacing of the bolts. The tension forces in bolts A and C depend on these measurements, as well as the distribution of Sally's weight. Without this data and an initial attempt at solving the problem, further assistance cannot be provided. Accurate calculations require a complete understanding of the setup. Providing the missing details will enable a more precise analysis of the forces involved.
rudeted
Messages
1
Reaction score
0
Hey guys, question:

Sally is standing on a diving board. Her weight is 50 kg. The diving board is fastened to a bracket with bolts A and B, and the bracket is fastened to the ground with bolts C and D.

Estimate the force of the bolts that are in tension (A and C) when sally is standing still..

Help please?
 
Physics news on Phys.org
Hi, Rudeted,

Your problem statement is incomplete because you don't indicate any dimensions, like the length of the diving board and the bolt spacings. Please show what they are, AND also you must show some attempt at your work before we can be of further assistance.
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Equilibrium of Forces and Torques on Sawhorses Supporting a Person on a Board
Replies
6
Views
2K
How Is Elastic Potential Energy Calculated in a Compressed Diving Board?
Replies
3
Views
7K
What are the forces exerted on a diving board when a person stands on the tip?
Replies
1
Views
22K
Highschool Diving board distortion problem
Replies
2
Views
2K
What are the forces on the supports of a diving board?
Replies
1
Views
3K
Torque and Force of diving board
Replies
24
Views
15K
How to calculate the force exerted by the "tendon" on the "tibia" bone?
Replies
4
Views
947
Calculating Diving Board Force: 596N Diver, 1.9m from Fulcrum, 114N Board
Replies
15
Views
8K
What Is the Tension in Each Pedestal of a Diving Board?
Replies
1
Views
3K
How to Calculate Torque and Tension in a Diving Board System?
Replies
5
Views
9K

Hot Threads

Recent Insights

Back
Top