Calculating Work and Kinetic Energy in a Vertical Helicopter Lift

AI Thread Summary
To calculate the work done by a helicopter lifting a 72.7 kg astronaut 16.9 m with a constant upward acceleration of 7.23 m/s², the correct approach involves determining the total force exerted by the helicopter. This force includes both the gravitational force (mg) and the force required for the upward acceleration (ma). The formula for work is then applied as Work = Force x Distance. The initial attempts at calculating work were incorrect due to miscalculating the force required. The final formula incorporates both components to yield the correct work done by the helicopter.
shenwei1988
Messages
23
Reaction score
0
A helicopter is used to lift a 72.7 kg astronaut 16.9 m vertically out of the ocean by means of a cable. The astronaut rises with constant upward acceleration of magnitude 7.23 m/s2 until she reaches the helicopter.

a) How much work is done by the helicopter on the astronaut?


W=1/2MV^2=FS


first try: V^2=2as W=mas=8882.9949J wrong
second try: F=mg W=mgh=12052.8603J wrong

someone help me please, thank you so much!
 
Physics news on Phys.org
First find the force required to lift the person. Then use work is force times displacement to find the work.
 
is the force mg ?
 
Use Newton's Second Law.

F = m*a

Force of helicopter - mass of astronaut * g = mass of astro * 7.23

Therefore the Force the helicopter must exert is 7.23 m + mg

Work = Force x Distance, so its just (7.23 m + mg) (16.9) Joules. Good luck!
 
yeah, i forgot to add the force of helicopter. thank you man!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top