Can a 84 kg Climber Safely Descend with a Damaged Rope?

  • Thread starter Thread starter samdiah
  • Start date Start date
  • Tags Tags
    Falling
AI Thread Summary
An 84 kg climber is attempting to descend a damaged rope that can only withstand 675 N of tension. To maintain a constant speed, the climber must balance forces, which means the rope's tension must equal the gravitational force acting on him, but this is not possible without exceeding the rope's limit. Calculations indicate that the climber would need to accelerate at 7.3 m/s² to avoid breaking the rope, but this acceleration is too high for safe descent. The discussion also explores the forces acting on the climber, emphasizing the need to consider both gravity and rope tension. Ultimately, achieving a constant velocity is not feasible without risking the rope's integrity.
samdiah
Messages
80
Reaction score
0
Hello,
I cannot solve this question from 4u physics Dynamic assignment and was wondering if somesome can give me guidance as to how to approach the question?

84 kg mountain climber rapples down a rope. The rope is damages and can withstand only 675 N of tension. Can the climber limit the descent to a constant speed without breaking the rope? If not, what value can the climber limit the downward acceleration to?

Thank You!
Waiting for your reply
 
Physics news on Phys.org
You should know that at a constant speed, all forces are in equilibrium. Take it from there.
 
Thanks for the reply, but I still don't understand.
This is how far I got.
I said FT=675 N
m=92 kg

F=ma
675=92a
a=7.3 m/s2

so the in order for the rope to not break the climber has to travel at minimum acceleration of 7.3 m/sec2. In order for him to attain a constant veloctiy he will have to put more tension on the rope and if he does that the rope will break.
 
Someone please help!
 
samdiah said:
Someone please help!

Newton's law of motion states that the resultant (i.e. the sum) of all forces acting on a body equals, in a special case, the product of mass and acceleration, F=ma. Is the force of the rope the only force acting on the climber?
 
Well there would be gravity and friction present. So should I add
g=9.8*92
=901.6 N
Fnet=226.6 N (down)
a=2.5 m/s (down)

How does that help calculate weather constant velocity is possible?
 
samdiah said:
Well there would be gravity and friction present. So should I add
g=9.8*92
=901.6 N
Fnet=226.6 N (down)
a=2.5 m/s (down)

How does that help calculate weather constant velocity is possible?

For constant velocity, the net force equals zero, i.e. the forces are in equilibrium. Is this possible?
 
Thanks a lot for all that help! This was very helpful for me and saved me a lot of time of trying to understand the question. This is an awesome site with awesome people!
 
I had another quick question aboutthe second part: what value can the climber limit the downward acceleration to?

is what I did before right:
g=9.8*92
=901.6 N
Fnet=226.6 N (down)
a=2.5 m/s (down)

or do I have to do the following:
F=ma
675=92a
a=7.3 m/s2

Can u explain which one and why? I am kind of unsure.
 
  • #10
Can someone please help me again!
 
  • #11
:

:confused:
 
  • #12
Remember that it's the total force that gives you the acceleration, not just the force from the rope.
 
  • #13
I Need Major Help Fast, Its About Finding Time!

How would you get time for this:

5. A stone is thrown horizontally at 8.0 m/s from a cliff 78.4 m high. How far from the base of the cliff does the stone strike the ground? (Use GUESS Method)

G: vi = 8.0 m/s
g = 9.8 m/s2
dy = 78.4 m
U: dx
E: d = vi*t +1/2 a*t^2
S: dx = 32 m


vi =initial velocity
^2= squared
*= times
 
  • #14
srry my bad
 
Back
Top