Can a Circuit Be Powered by Both USB and DC Supply Simultaneously?

  • Thread starter Thread starter xortan
  • Start date Start date
  • Tags Tags
    Dc Supply Usb
AI Thread Summary
The discussion focuses on designing a power system for a circuit that can be powered by both USB and DC voltage simultaneously. The circuit requires constant USB connection for communication, while also needing to switch to DC power without drawing from USB when applicable. Participants suggest using PMOS MOSFETs to create a seamless switch to DC power when connected, although dynamic switching is not a strict requirement. A recommended chip, the MIC1344, can automatically select between two input voltages, but users are advised against using its automatic mode in favor of a logic-driven approach. The conversation highlights the importance of ensuring reliable power management in the circuit design.
xortan
Messages
76
Reaction score
1
Hello everyone,

I am designing the power system of a new circuit. It will receive an analog video signal and then be able to split that video signal to multiple outputs. I would like to have multiple ways to power the circuit depending on the application. One way to power the device will be by apply a DC voltage to the circuit and the other way will be by using the 5V from the USB.

The USB needs to be connected at all times for the communication. We may use this circuit in other places as just a receiver/splitter and the USB will not be required and it will be powered from the DC voltage. We may have an application where we don't want the DC voltage and will power just from USB. For the current application we will have the USB and adapter connected at the same time.

I am having problems trying to find a chip where I can have an adapter plugged in and a USB at the same time. If someone could please point me in the right direction of how to accomplish this it would be greatly appreciated. I am fairly new to electronics design (only graduated a year ago).

Thanks!
 
Engineering news on Phys.org
You want to switch to DC power (and not draw from USB +5) when there is voltage applied to the DC input jack.
Does it need to work dynamically without missing a beat? For example, if I am watching video and plug in the DC supply, does it have to switch glitchlessly?
That makes it a bit harder. (need to be careful)

I'd use pmos mosfets to implement a SPDT switch that seamlessly switches to DC when DC is plugged in.

Can you use this?
http://www.micrel.com/index.php/pro.../dual-high-side-pwr-sw/article/5-mic1344.html
 
Yes, I would like to switch to DC power when there is voltage applied to the jack and not draw from the USB +5V.

I don't think it needs to work dynamically like that. The circuit will always be placed inside an enclosure and the USB cable or DC supply will already be wired up depending on the application. There is no situation where a customer will be viewing video and have to open the enclosure and supply power to the device. If it can be switched without a glitch I think that is an added benefit but not a requirement.

That chip looks interesting. It states it will automatically select between the higher of the two input voltages. I don't know how I can make that work when switching between a 5V DC supply and 5V from the USB.
 
xortan said:
That chip looks interesting. It states it will automatically select between the higher of the two input voltages. I don't know how I can make that work when switching between a 5V DC supply and 5V from the USB.

Don't use automatic mode. Use some logic to drive ENA and ENB based on whether DC is connected.
 
  • Like
Likes xortan
Okay, I understand. Thanks so much for the help! I really appreciate it. :)
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Can 9V DC Be Lethal in Biomedical Experiments?
Replies
5
Views
1K
DC-DC conv. Ripple affecting Speech Recognition - Capacitance multiplier
Replies
22
Views
2K
Buck Converter with USB-C output
Replies
2
Views
2K
Sizing an Isolation Transformer for a DC Power Supply
Replies
8
Views
2K
Dc dc dual converter USB powered
Replies
4
Views
2K
Could you use Solar to power a DC to AC Inverter? (Description below)
Replies
6
Views
3K
Can dumb / feature phones be charged using USB?
Replies
9
Views
2K
Using this power level indicator to measure a power supply voltage
Replies
1
Views
2K
Negative Power Supply Clarification
Replies
7
Views
1K
Can USB Ports Be Converted to Power a 12V 1Amp Device?
Replies
14
Views
3K

Hot Threads

Recent Insights

Back
Top