Can I use symmetry in modal analysis in FEA

AI Thread Summary
Using symmetry in finite element analysis (FEA) is viable for symmetric shapes in boundary conditions and geometry, as it can simplify the analysis and save computational time. Trials may yield similar results, but confirming the appropriateness of symmetry depends on the specific model. Examples, such as spring mounts and injection molding scenarios, demonstrate effective use of symmetry in FEA. However, it is essential to evaluate the model's characteristics to determine if symmetry can be applied. Providing a detailed description or image of the CAD model can facilitate better guidance on this matter.
Mohamed_Wael
Messages
19
Reaction score
0
I am doing FE analysis for symmetric shape in boundary conditions and geometry, I would like to know if I can use symmetry in my analysis or not. I have tried to run trials, the results are very similar but I am not sure if this just a coincident
 
Engineering news on Phys.org
Hi Mohamed_Wael,
depending on your model, you can make use of symmetry. You can read more about the preprocessing here.
If you for example take this project of a spring mount as an example, you'll find out that here they made use of symmetry.
This, however doesn't mean you can do it anytime.
Maybe describe your CAD model or post a picture of it to help us understand what you're trying to do and we can help you evaluate.
 
  • Like
Likes Mohamed_Wael
In injection molding, we use a type of FEA software called MoldFlow that simulates plastic flowing in a mold. If the part is symmetrical, then we can use symmetry to save time. We also use symmetry with regards to the full shot vs. the number of cavities. So if I have four cavities on one runner, we model one cavity and a quarter of the runner.
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...

Similar threads

Back
Top