Can You Help Me Find a Heart Beat Detector Circuit with LED Display?

  • Thread starter Thread starter benzun_1999
  • Start date Start date
  • Tags Tags
    Detector Heart
AI Thread Summary
A user is seeking recommendations for a heart beat detector circuit that includes an LED display to visually represent heart activity. Benzun suggests a circuit that utilizes a soundcard as an analog-to-digital converter, which aligns closely with the user's requirements. The proposed solution addresses the need for isolation since the circuit won't be connected to a computer. A link to a relevant resource is provided for further exploration. This discussion focuses on finding effective circuit designs for heart rate detection with visual output.
benzun_1999
Messages
260
Reaction score
0
can anyone sugest me a good heart beat detector circuit. note the circuit must detect the current from the heart and LED display in a column.

-Benzun
 
Engineering news on Phys.org
I'd found this in a search to use the soundcard as an A/D and is pretty close to being right in the ballpark of your question. And since you're not connecting to a computer the isolation isn't a major issue.

http://www.eng.utah.edu/~jnguyen/ecg/ecg_index.html
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Basic Circuit: Why don't these two LEDs light up?
Replies
9
Views
2K
Deciding batteries for my circuit
Replies
3
Views
1K
Charlieplexing: LEDs have different brightness
Replies
14
Views
2K
Can a simple metal detector be modified to detect pipes at a higher voltage?
Replies
10
Views
6K
Help with 12V LED and Power Source Questions
Replies
8
Views
3K
RC Phase Shift Oscillator not Oscillating
Replies
41
Views
7K
Can I get some help please? (single image display)
Replies
8
Views
1K
Increasing the Battery Life of an LED Circuit
Replies
26
Views
4K
Help me understand how this breadboard works?
Replies
6
Views
2K
Simulation of transistor switch circuit
Replies
5
Views
3K

Hot Threads

Recent Insights

Back
Top