Center of Mass, Momentum, and you

AI Thread Summary
A projectile with a mass of 20.1 kg is fired at a 65-degree angle and explodes into two equal fragments at its peak. The first fragment falls vertically with zero initial speed, while the second fragment's initial speed is calculated using conservation of momentum, resulting in 66.77 m/s. To determine the distance the second fragment travels, the horizontal distance covered before the explosion and the time it takes to fall to the ground must be calculated. The total distance is the sum of the horizontal distance traveled before the explosion and the distance the second fragment travels after the explosion. The calculations involve using the projectile's initial velocity components and applying conservation laws effectively.
Devrin
Messages
1
Reaction score
0
Center of Mass, Momentum, and energy problem, shell seperation

Homework Statement



A projectile of mass 20.1 kg is fired at an angle of 65.0 degrees above the horizontal and with a speed of 79.0 m/s. At the highest point of its trajectory the projectile explodes into two fragments with equal mass, one of which falls vertically with zero initial speed. You can ignore air resistance.

A) How far from the point of firing does the other fragment strike if the terrain is level? (gravity is 9.8m/s^2)

Homework Equations



Distance Formula
xf=xi+vt+at^2

Conservation of Momentum
mv1=m1u1+m2u2

Conservation of Energy
.5mv^2=.5m(u1)^2+.5m(u2)^2

The Attempt at a Solution



ok, I started out by finding the total time it takes for the mass system to make it's parabola and land, which is 7.306s then I find the total x the mass system would have gone, which was 244m=79cos(65)*(7.306)
once I did this I started using momentum to find the initial speed of the second particle to get 66.77m/s. this is where I get stuck. I plug in my new data for the 2nd particle in the position formula, dividing time by two because it's already at it's peak, and I get 553m from it's original launch point. this is mastering physics and I don't even get a "you are close" error message. I am just completely stuck.
 
Last edited:
Physics news on Phys.org
I'm confused about the part where you say you are "dividing time by two because it's already at it's peak". That time is irrelevant to the fragment after the explosion. You need to find the new time it takes that fragment to reach the ground based on its new velocity after the explosion (Hint: you can get this time based on the first fragment that was initially at zero speed after the explosion).

To get the total distance, you must add the horizontal distance traveled by the large mass before the explosion, and what the second fragment travels after the explosion.

That's my take on it anyway.
 
Ok, you know the angle its fired at and the velocity. So, you take the component of velocity in the vertical direction (vsinx, where x is the angle), and using that you find the max height (u^2sin^2x=2gh).

Now, at this point you apply conservation of linear momentum along the horizontal, as the net force is zero along the horizontal. This gives you mvcosx=m(0)+m(v2).

From here you get your velocity v2, of the block that doesn't stop in mid air. You have the height, and the velocity. The distance the block travels in the horizontal direction in the time it takes for it to fall on the ground is what youre asked.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top