How Far Will Dave Fall Before the Bungee Cord Stops Him?

AI Thread Summary
Dave jumps off a bridge with a bungee cord, falling 15 meters before the cord stretches. His mass is 75 kg, and the bungee cord follows Hook's law with an elastic constant of 50 N/m. To find how far he falls before stopping, the gravitational potential energy (GPE) and elastic potential energy (EPE) are equated, leading to the conclusion that he falls 55 meters in total. While some suggest using force calculations, the energy approach is more straightforward since both force and extension are unknowns. The discussion emphasizes the importance of conservation of energy in solving the problem.
Delzac
Messages
389
Reaction score
0
hi i have a Qns.

Dave jumps off a bridge with a bungee cord( a stretchable cord) tied around his ankle. He falls for 15m before the bungee cord begins to stretch. Dave's mass is 75kg and we assume the cord obeys Hook's law with elastic constant, k= 50N/m. if we neglect air resistance and the mass of the cord, calculate how far below the bridge Dave will fall before coming to a stop.

i understand that i have to use the formula F=Ke and i need to find F.
how should i go about finding it? which formula to use?
 
Physics news on Phys.org
Consider conservation of energy.
 
Got it!

Let X be the height Dave fall before comin to a stop
Let e be the extension of bungee cord.

GPE=mgh
=(75)(9.82)(X)

Elastic Potential Energy= 1/2Ke^2
= 1/2(50)(X-15)^2

Equate it together and X = 55m.

However can't u sovle by finding Force??
 
Delzac said:
However can't u sovle by finding Force??
There's no direct way to use F=ke to solve for e (if that's what you mean), since both F and e are unknowns.
 
Delzac said:
Got it!

Let X be the height Dave fall before comin to a stop
Let e be the extension of bungee cord.

GPE=mgh
=(75)(9.82)(X)

Elastic Potential Energy= 1/2Ke^2
= 1/2(50)(X-15)^2

Equate it together and X = 55m.

However can't u sovle by finding Force??
You are indirectly using force when you use energy. The incremental potential energy stored in the cord is dU = Fde, so total potential energy is:

U = \int_{0}^{e_f}Fde = \int_{0}^{e_f}Kede = \frac{1}{2}Ke_f^2

[Note: Ke is spring constant x extension, not Kinetic energy]

AM
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Correct statement about a reservoir with outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top