Change in entropy of a capacitor

alexiaphysics
Messages
1
Reaction score
0

Homework Statement



What is the entropy change of the universe as a result of the following processes:

(a) a 1μF capacitor is connected to a 100V electrochemical cell at 0°C,

(b) the same capacitor after being charged to 100V is discharged through a resistor kept at 0°C?

Homework Equations



dS = δQ/T (for reversible processes)
dS > δQ/T (for irreversible processes)

Capacitor energy = ½*C*V^2

The Attempt at a Solution



The main thing I'm stuck on is what exactly is happening at (a). I'm not quite sure where the entropy change could come from, or what could cause it. It seems to me that there isn't enough information - are they asking for the entropy change at the instant the capacitor is connected, in which case there's been no current flow, and so has anything actually happened? Are we meant to consider the work done in physically connecting the capacitor? (I would doubt so.) If it is at the instant when they are connected, before any current has flowed, then either nothing has happened, or it's fully reversible (both of which would give ΔS = 0), or we have no idea what the entropy change is because it's to do with the work done getting it there.

As for (b), if we say the capacitor energy is equal to the heat, then ΔS =(C*V^2)/(2*T) = 1.83x10^(-5), but I'm not sure if this is for just the capacitor or if this is the change in entropy of the universe? I'm not sure exactly what angle to approach this from, but that's my main guess at how I'd go forward, but it might be wrong.

I'd really appreciate any thoughts on part (a) of the question - if I've missed anything especially, and also maybe some hints on how to proceed on part (b) (and if I'm going in the right direction or not). Can't seem to find examples of similar questions online either! (If you know of any, please link me!)

Thanks!
 
For part (b) the energy change through the resistor as your capacitor reduced its voltage from ##V## to ##V-dV## is:

$$ dQ_{rev} = \frac{1}{2}CV^2 - \frac{1}{2}C(V-dV)^2 $$
$$ dQ_{rev} = \frac{1}{2}CV^2 - \frac{1}{2}CV^2 - CVdV - \frac{1}{2}(dV)^2$$

To first order in ##dV##:

$$dQ_{rev} = -CVdV$$

Using the second law for a reversible process:

$$\Delta S_{tot} = \int \frac{dQ_{rev}}{T}$$
$$\Delta S_{tot} = \int_{V_0}^{0} \frac{-CVdV}{T} = \frac{C}{2T}(V_0^2)$$

Plug the numbers into evaluate.
 
alexiaphysics said:

Homework Statement


What is the entropy change of the universe as a result of the following processes:
(a) a 1μF capacitor is connected to a 100V electrochemical cell at 0°C,
I think also that there's not enough info to do this numerically. I think you need the heat capacity of the battery CZ at constant charge, then T dS = CZ dT IF the battery emf is not a function of temperature. To get CZ I think you need to know the valence number of the cell and the Faraday constant (96,500 coulombs). Bit rich for me I'm afraid.
(b) the same capacitor after being charged to 100V is discharged through a resistor kept at 0°C?
Since this is happening at constant temperature, total heat trasferred = initial capacitor stored energy and so ΔS = ΔQ/T.
 
alexiaphysics said:
(a) a 1μF capacitor is connected to a 100V electrochemical cell at 0°C,

I assume they are asking for entropy change after the cap voltage has reached 100V. I believe half the energy extracted from the cell ends up stored in the electric field of the capacitor. The other half is dissipated. You won't get it back when you discharge the cap through the resistor.
 
David Lewis said:
I assume they are asking for entropy change after the cap voltage has reached 100V. I believe half the energy extracted from the cell ends up stored in the electric field of the capacitor. The other half is dissipated. You won't get it back when you discharge the cap through the resistor.
I would agree.
 
##|\Psi|^2=\frac{1}{\sqrt{\pi b^2}}\exp(\frac{-(x-x_0)^2}{b^2}).## ##\braket{x}=\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dx\,x\exp(-\frac{(x-x_0)^2}{b^2}).## ##y=x-x_0 \quad x=y+x_0 \quad dy=dx.## The boundaries remain infinite, I believe. ##\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dy(y+x_0)\exp(\frac{-y^2}{b^2}).## ##\frac{2}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,y\exp(\frac{-y^2}{b^2})+\frac{2x_0}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,\exp(-\frac{y^2}{b^2}).## I then resolved the two...
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top