Charge distribution between two spherical hollow conductors.

AI Thread Summary
When two spherical hollow conductors, charged to Q1 and Q2, are connected by a wire, charge redistributes due to the repulsion of like charges. The inner conductor will lose its charge to the outer conductor, resulting in the outer sphere acquiring all the charge while the inner sphere ends up with none. This occurs because charges on a conductor always seek to be as far apart as possible, leading to an even distribution on the outer surface of the outer sphere. If the spheres were insulators instead of conductors, the charges would not redistribute at all, as insulators prevent charge movement. Understanding these principles is crucial for grasping electrostatics in conductors.
sankarshana016
Messages
6
Reaction score
0
Consider two spherical hollow conductors, charged to Q1 and Q2 coulombs respectively. What happens when one is placed within the other, and they are connected by a thin metallic wire?
I do know that if they were placed at a distance from each other, the charge is distributed in the ratio of the ratio of their capacitance. The solution to this problem is that all the charge flows from the inner conductor to the outer one. Why? Any help is appreciated.
 
Physics news on Phys.org
Welcome to PF;
Like charges repel.
This is why they end up evenly distributed on the surface of a sphere: that's the farthest they can get from each other.

OK so - imagine that Q1=Q and Q2=0 and Q1 is inside - link the two spheres with a wire and what happens?
 
Thank You!
I know that charge always lies on the surface of the conductor. If I link the two spheres with a wire, would the charge be evenly distributed between the two spheres (i.e, Q/2 and Q/2), or would all the charge flow to the outer sphere?(i.e, Q1=0 and Q2=Q)
 
sankarshana016 said:
Thank You!
I know that charge always lies on the surface of the conductor. If I link the two spheres with a wire, would the charge be evenly distributed between the two spheres (i.e, Q/2 and Q/2), or would all the charge flow to the outer sphere?(i.e, Q1=0 and Q2=Q)
That's the question I'm trying to get you to work out the answer to :)

Do you understand why the charge is always on the surface of a conductor?

You have to take account that like charges repel - the charges will try to get as far away from each other as they can.

So what happens when one sphere is inside the other?

You could think of it like this - the two spheres together with the wire joining them comprise a single solid conductor. Where do the charges on a conductor end up?
 
OH, I got it. Thanks. The charges would flow to the larger sphere. The inner sphere will be left with no charge. Am I right?
Also, What would happen if the two spheres aren't conductors? Would charge be redistributed at all?
 
That's right - the charges seek to be as far apart as possible - the way to do that is to entirely occupy the outer sphere.

Strictly: charges flow between the spheres until the net unbalanced charge is evenly distributed across the outer surface of the outer sphere.

Insulators, by definition, do not conduct charges.
Therefore the charges don't move - they want to, but the material of the insulator won't let them.

In practice the situation is messier but you'll learn more about that later in your course.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top