Collision Problem: Football Player & QB, Coeff of Friction 0.052

  • Thread starter Thread starter Faded Maximus
  • Start date Start date
  • Tags Tags
    Collision
AI Thread Summary
A football player weighing 71 kg running at 2.1 m/s collides with a stationary quarterback weighing 52 kg, resulting in a combined velocity of 1.212 m/s post-collision. The coefficient of friction between their cleats and the ground is 0.052, leading to a frictional force of 62.68 N. To determine how far they will move after the collision, the work done by friction must be calculated using the energy lost due to friction. The energy conservation equation, incorporating kinetic energy before and after the impact and the work done against friction, is essential for solving the distance traveled. Understanding these concepts allows for the calculation of the distance the players will slide together after the collision.
Faded Maximus
Messages
9
Reaction score
0

Homework Statement



A football player weighing 71 kg running at 2.1 m/s sacks a stationary quarterback who weighs 52 kg. How far will the two move after the collision if the coefficient of friction between the cleats and ground is 0.052.

Homework Equations



m1v1' + m2v2' = mv'1
uk = Fk / Fn

The Attempt at a Solution



m1v1' + m2v2' = mv'1
(m1v1' + m2v2') / m = v'1
v'1 = 71 * 2.1 / 123
v'1 = 1.212 m/s

uk = Fk/Fn
Fk = Fnuk
Fk = 123 * 9.8 * 0.052
Fk = 62.68 N

Providing I did this right, I now have the speed they move after they are together and the friction in N. From here I am not sure how to calculate the distance they will move. Could somebody give me a hand?
 
Physics news on Phys.org
Consider the work done by the friction to bring the players to a stop. You know how much energy there is, since you know the velocity of the players after impact.
 
I understand what you mean:

w = fd
d = w / f

but I am unaware of how I know how much energy there is from the velocity.

edit: would you substitue w for Ek, which would be 1/2mf^2 - 1/2mvi^2?
 
Last edited:
If you write out the energy conservation for before and after impact and include the energy lost due to friction, it is a bit more obvious,

0.5m1v1^2 = 0.5mv^2 + fd

where fd is the energy lost due to friction.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...

Similar threads

Back
Top