Confusing Old time Measurements =(

AI Thread Summary
The discussion revolves around converting the speed of light from miles per second to megafurlongs per fortnight. A furlong is defined as 0.125 miles, and a fortnight equals 14 days. The initial calculation starts with the speed of light at 186,000 miles per second, which needs to be converted using the appropriate conversion factors. Participants emphasize the importance of breaking down the conversion into manageable steps and correcting initial misunderstandings about the speed of light's units. Ultimately, the conversion illustrates the relationship between different units of measurement in a practical context.
Teenytiny1991
Messages
14
Reaction score
0

Homework Statement


A furlong is and old British unit of length equal to 0.125 mi, derived from the length of a furrow in an acre of plowed land. A fortnight is a unit of time corresponding to two weeks, or 14 days and nights. Find the speed of light in megafurlongs per fortnight. (one megafurlong equals a million furlongs).


Homework Equations



speed= distance/time
fur=0,125 mi
for=2 weeks
mg= 1,000,000 fur

The Attempt at a Solution



1 mf/ 1,000,000 fur x 1 fur/0.125 mi x 0.125 mi/ 1fur x 2w/1 for = ... I'm stumped here. i can't understand which way to set it up so that i am only left with mf/for
 
Physics news on Phys.org
If you are inexperienced with this, I suggest that you do it in steps instead of trying all at once. I will get you started, but you will have to finish.

You start with what you know. The speed of light is c = 186,000 mile/hr. So you write

c=186,000\frac{mile}{hr}

Now you are given that

1 mile=\frac{1}{0.125}fu

Put that in the previous expression to get

c=186,000\frac{1}{0.125}\frac{fu}{hr}

Now

1fu=10^{-6} Mfu

Put that in the expression to get

c=\frac{186,000\times10^{-6}}{0.125}\frac{Mfu}{hr}

Finish the question by proceeding along these lines to get the fortnight in the denominator. Incidentally, you don't really need the 186,000 there. You could as well start with 1 mile/hr to get the conversion factor then multiply the result by 186,000.*** Correction ***

As pointed out by mgb_phys, the speed of light is 186,000 miles/sec. So the conversion is from "sec" to "fortnight". My apologies for the confusion.
 
Last edited:
The speed of light in SI units is defined as (approximately) 3 \times 10^8 m/s.
How many miles per second is this?
So how many furlongs per second?
 
First you need to estimate the answer so you know if you got it right.
A furlong is less than a mile so a speed in furlongs/hour would be a larger number than mi/hour (ie at the same speed you do more furlongs than you do miles) - just like a speed in km/h is a bigger number than in mph.
But a fortnigth is much bigger than an hour so at the same speed you would cover a much bigger distance. So the same speed would be a much bigger number in f/f

Converting is just a matter of fractions.

Assuming you start in miles/sec (c = 186,000 mi/s)
furlongs / fortnight = miles/second * ( fortnight/second) / ( furlongs / mile )

furlongs/mile = 0.125, fortnight/second = 14*24*3600
So 186,000 * (14*24*3600/0.125) =
 
kuruman - slight typo, it's 186,000 mi/SECOND

Teenytiny1991 - using Furlong/Fortnight/Firkin is to teach how to do these sort of conversion. It's just a bit more fun than doing mi/s to m/s or J to eV.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top