Connecting an External Audio Source to a DDS-100 Function Generator

AI Thread Summary
Connecting an external audio source, like an MP3 player, to a DDS-100 Function Generator is not straightforward due to the lack of an input signal connection on the device. Users suggest that mixing audio signals or using a modulator could be potential solutions, though this might result in poor audio quality if not executed well. Alternatively, MIDI processors could extract melodies from MP3 files, allowing for programming the generator's output, but again, the DDS-100 lacks the necessary input capabilities. Exploring software options on a capable PC may provide a more versatile and future-proof solution for audio manipulation. Overall, significant research is needed to find a suitable function generator that supports external audio input.
Sveral
Messages
63
Reaction score
1
Hello,
I wanted to know, if it`s possible and how it to go about connecting an external audio source, for example, an mp3 player to the circuit of a DDS-100 Function generator, so that it outputs the audio from the mp3 in the selected wave form?

http://www.ebay.co.uk/itm/DDS-Function-Signal-Generator-Module-Sine-Square-Sawtooth-Triangle-Wave0-5-14Vpp-/182127176882?hash=item2a67a02cb2:g:D9IAAOSwvU5XMwDJ
Thanks.
 
Engineering news on Phys.org
There may be some, but according to the online description this doesn't have that capability. For instance there is no connection for an input signal, only power input.
 
Tom.G said:
There may be some, but according to the online description this doesn't have that capability. For instance there is no connection for an input signal, only power input.
So the way to go about this would be to mix both of the audio signals or something?
 
I am not sure, exactly what you want but it sounds to me that you could be after a modulator which would modulate the programme material onto your generator output. That would give a possibly hideous output unless it's tastefully done. Or did you want to be able to transcribe the 'tune' of the MP3 file and programme the output of your signal generator. I believe there are midi processors that can dig out the melody of a recorded tune and produce a one- note version in midi code. That code could then be used to programme a suitable generator frequency and amplitude. But, as has been pointed out, the unit in your link has no electronic input for achieving this. If you really keen on this sort of thing then you would need to do a lot of homework, trawling around for a suitable unit (not as cheap as £13, I would think).
Otoh, you could go down the software route, if your PC is new and fast enough, to achieve the functions I have described. Doing it that way would ensure a certain amount of future proofing for your investment. There is a big scene in electronic music and loads of enthusiasts and 'experts' post their ideas on the Web.
 
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...

Similar threads

Back
Top