Conservation of momentum and energy

AI Thread Summary
The discussion revolves around a physics problem involving the conservation of momentum and energy during a bullet's interaction with two blocks on a frictionless surface. The scenario describes a bullet passing through the first block and embedding itself in the second, with specific masses and speeds provided. Participants are tasked with calculating the bullet's speed after passing through the first block and its original speed using conservation principles. The key takeaway is that momentum and energy remain constant throughout the interactions, which is essential for solving the problem. Understanding these conservation laws is crucial for accurately determining the speeds involved.
krypto
Messages
14
Reaction score
0
Conservation of momentum and energy :D

:frown: Wats this question on bout?

1. [HRW6 10.P.026.] In Fig. 10-32a, a 4.00 g bullet is fired horizontally at two blocks at rest on a frictionless tabletop. The bullet passes through the first block, with mass 1.20 kg, and embeds itself in the second, with mass 1.80 kg. Speeds of 0.630 m/s and 1.40 m/s, respectively, are thereby given to the blocks (Fig. 10-32b). Neglect the mass removed from the first block by the bullet.
(a) Find the speed of the bullet immediately after it emerges from the first block.
(b) Find the bullet's original speed.
 
Physics news on Phys.org
As it says, use conservation of momentum and energy.

Calculate the initial momentum and energy.
Calculate the momentum and energy after the bullet passes the first block.
Calculate the final momentum and energy after the bullet is embedded in the second block.

The momentum and energy don't change throughout the process.
 
Thnx for that help, it was really confusin me!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top