Constructive Interference from Speakers on an x-axis

AI Thread Summary
The maximum amplitude produced from the speakers is calculated to be 12.86 Pa. The user initially struggled with setting up the expression to find the distance to move one speaker, questioning whether to solve for phase difference. Clarification was requested from other forum members, emphasizing the need for an attempt to adhere to forum rules. After further work, the user successfully arrived at the correct answer, realizing the mistake was in converting degrees to radians for the phase calculation. This highlights the importance of careful unit conversion in wave interference problems.
ab200
Messages
13
Reaction score
3
Homework Statement
Two speakers, A and B, are at the same point on an x-axis and each emits sound with a wavelength of 0.25 m. Speaker B's phase constant is 260 degrees larger than speaker A's phase constant and each produces an amplitude of 10 Pa.

What is the minimum distance you can move speaker A to achieve constructive interference along the x-axis? Give a positive answer regardless of direction, in m.
Relevant Equations
ΔΦ/2π = Δx/λ + ΔΦo/2π = m , m = 0,1,2,3...
The first part of this question asks for the maximum amplitude produced, which I found to be 12.86 Pa. I was able to set up the expression for the combined wave equations.

However, I am struggling to understand how to set up and solve an expression to find the distance I could move one of the speakers. I have wavelength, frequency, and amplitude, as well as difference in phase constant. Am I solving for phase difference?
 
Physics news on Phys.org
ab200 said:
Am I solving for phase difference?
It's not entirely clear what you mean by that. Please post an attempt based on that approach. An attempt is required by forum rules anyway, and it will clarify what you have in mind.
 
haruspex said:
It's not entirely clear what you mean by that. Please post an attempt based on that approach. An attempt is required by forum rules anyway, and it will clarify what you have in mind.
I apologize — after working on it again I arrived at the correct answer. I’m not entirely sure what I did the first time, but I suspect I didn’t convert degrees into radians when calculating difference in initial phase.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top