Could a Personal Helicopter Backpack Revolutionize Personal Transit?

  • Thread starter Thread starter plum
  • Start date Start date
AI Thread Summary
The concept of a personal helicopter backpack raises intriguing possibilities for personal transit but faces significant challenges. Key issues include the need for powerful yet lightweight engines, as current reciprocating engines are too heavy for practical use. The complexity of rotary wing controls and the necessity for counter-rotating blades add to the design difficulties, making it less feasible. Additionally, concerns about safety, fuel weight, and the practicality of allowing widespread use of such devices are prominent. Overall, while the idea is innovative, it has been deemed largely impractical due to these technical and safety challenges.
plum
Messages
136
Reaction score
0
This idea came to me in a most peculiar dream, and I was wondering if it would be possible:

Basically, it would be a backpack that you strap on with arms that come down (like a car seat) with controls at the ends. You start up the little engine in the backpack and mini helicopter blades extend up and outwards, just powerful enough to lift yourself and the engine. The retractable blades would mean you wouldn't have to tie up the contraption like a bike when entering buildings.

Is there an engine that could be powerful enough to do this (yet light enough to carry around?) If so, it could have tremendous implications for personal transit.
 
Engineering news on Phys.org
There are a few problems with this idea.

1.) Counter-torque - in order to keep the passenger from spinning opposite the rotor, the machine would need two counter-rotating sets of rotorblades. The gearing to do this would make the vehicle bulkier and heavier (thus being less practical and requiring a larger engine)

2.) Weight - without doing a product survey, I'm going to say that there are engines with a high enough power-to-weight ratio to accomplish this, however I don't know if they'd be "light" enough to carry around all day (as you seem to indicate in your idea).

3.) Practicality - in reality, would you want any yay-hoo who could aford it flying overhead? Personally, I wouldn't. There are some people I don't even think should have DRIVER's licenses.

A good idea, but one that has already been thought of and deemed impractical. Nonetheless, keep up the brainstorming.

Cheers...
 
Thought you might find this to be of some interest.
 
To an extent, it has been attempted, just not in the small scale you are referring.

http://www.richguy.com/luxury/lifestyle/magazine.php?car=AIR&id=SoloTrek+XFV&aid=55&page=1

The company's website is defunct as much as I can tell, so I have a feeling that they have lost funding for it.

The big issues I see are the following:

1) Engines: Reciprocating engines are not so good when it comes to power to weight ratio. They are heavy for the amount of power they put out. That is why most helicopters today use turboshaft turbines.

2) Fuel. Fuel is heavy. You'd probably loose any lifting advantages by going small when you add the weight of the fuel.

3) Heat/safety. Engines are heat producers. I don't think you'd want something that hot on your back with just a backpack in between you.

4) Complexity. Rotary wing controls are very intricate and complicated. I don't see how you'd be able to make the connecting components small enough and compact to be able to make it so a person could carry it. Plus, like Lunchbox mentioned, you would have to have tandem rotors to alleviate counter torque issues.
 
Last edited by a moderator:
sounds like a great way to get a marine haircut from the neck up.
No... can't say I would like a blade whoop whooping just above the old grey matter.
 
Last edited:
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Back
Top