Coulombs Law, 4 separate charges.

AI Thread Summary
The discussion focuses on calculating the net electrostatic force on particle 3 using Coulomb's law, given four charges with specified values and distances. The participant attempted to find the forces acting on particle 3 from the other charges but encountered confusion regarding the separation of x and y components. They emphasized the importance of drawing force vectors and breaking them into components using trigonometric functions. Ultimately, the participant resolved their confusion and shared that multiplying the force by cos45 and sin45 is necessary for determining the x and y components from charge q2. The thread concludes with a note of appreciation for the assistance received.
Nal101
Messages
16
Reaction score
0

Homework Statement


the particles have charges q1 = -q2 = 296 nC and q3 = -q4 = 198 nC, and distance between each particle is 5.5cm.
hrw7_21-22.gif



Homework Equations


Find the net electrostatic force on particle 3
::Answer is required in vector form <x,y,z>::

The Attempt at a Solution


Using Coulombs law to find the fnet of each particle.
i.e.
eq1 = [(9e9) * 1.98e-7 * 2.96e-7] / .055^2 = force on particle 3 by q2 in x and y direction AND q1 in y direction
eq2 = [(9e9) * 1.98e-7 * 1.98e-7] / .055^2 = force on particle 3 by q4 in x direction

Then adding the forces together, applying the fact that q 1 and q3 repel each other (negative force)

getting <eq1+eq2, eq2-eq1>
 
Physics news on Phys.org
The net electrostatic force in q3 is the sum of three forces, one from each of the other particles. First draw these three forces in your diagram. Second, calculate their magnitudes. Third, add them as vectors, all the x-components together (which you must find) and all the y-components together (which you must also find).
 
That is what I tried to do in my solution, but it came out being wrong. I believe that I am confused on how to find the forces for each x and y component separately.
 
Draw three arrows with their tails on q3 in the appropriate directions. Break each arrow into x and y components assuming that q3 is at the origin of your axes. When you are ready, show us what you have done so that we can correct it if necessary.
 
I figured it out.

For anyone wanting to know, to find the x and y components of q2 on q3, you need to take the force and multiply it by cos45 (for x) and sin45(for y) before adding the vectors.

Thank you kuruman
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
8
Views
3K
Replies
2
Views
10K
Replies
3
Views
4K
Replies
1
Views
3K
Replies
2
Views
2K
Replies
1
Views
3K
Replies
2
Views
1K
Back
Top